PowerPoint video not playing: how to fix it

Quick answer: A video that won’t play in PowerPoint may be a format the app can’t decode or a linked file it can’t find. Microsoft recommends an .mp4 file with H.264 video and AAC audio, so convert the clip to that format and insert it again with Insert > Video > This Device. If the video was linked rather than embedded, put it in the same folder as the presentation and check its path under File > Info. If the video plays but stutters or shows black, make sure Disable hardware graphics acceleration is cleared under File > Options > Advanced.

Applies to: PowerPoint for Microsoft 365 on Windows and Mac, PowerPoint 2024, PowerPoint 2021, PowerPoint 2019 and PowerPoint 2016. Menu names below are from the Windows desktop app; Mac differences are near the end. If PowerPoint won’t start at all, see PowerPoint not opening first.

Match your symptom

Pick the line that fits what you see on the slide, then go to that fix.

What you seePossible causeGo to
Black box, error icon or “cannot play media” messageFormat or codec PowerPoint can’t decodeFix 1
Video plays on your PC but not on another oneLinked file left behind, or an old formatFix 2, Fix 7
File was made in an older version of PowerPointLegacy media that needs upgradingFix 3
Nothing happens when the slide appearsStart option set to a clickFix 4
Choppy video, audio out of sync, dropped framesGraphics settings, file size or effectsFix 5
Picture plays but there is no soundAudio codec or Windows sound outputFix 1, Fix 5
Online or YouTube clip shows a blank frameNo internet connection or a blocked siteFix 7

Fix 1: Check the file format and codec

Microsoft’s supported formats article lists what PowerPoint plays. A file extension alone doesn’t tell you much: two .mp4 files can hold different codecs inside, and only some of them decode.

  • Recommended: MP4 with H.264 video and AAC audio. For sound-only files, M4A with AAC audio.
  • Also supported for video: .mp4, .m4v, .mov (QuickTime) and .webm. A WebM file with Vorbis audio needs the Web Media Extensions app from the Microsoft Store.
  • Being phased out: in PowerPoint version 2505 and later, Windows Media, MPEG-2, AVI, AIFF and 3GPP files are limited and deprecated. Some still insert, but PowerPoint converts them to MPEG-4. MIDI audio is no longer supported.

If your clip is an .avi, .wmv or .mpg file, or an .mp4 recorded by a phone or camera with an unusual codec, convert it to MP4 (H.264 and AAC) with a video converter you trust, then delete the old video from the slide and insert the new one. As general guidance, the Clipchamp app in Windows 11 or a free tool such as HandBrake can export in that format. The same advice applies to screen recordings; our guide on recording video on screen in Windows covers built-in tools that save MP4 files.

Microsoft also notes that installing additional codecs may let PowerPoint play more file types. As general guidance, converting the file is the safer route when you share the deck, because the other computer may not have the same codecs installed.

Fix 2: Repair a broken link to the video

PowerPoint can either embed a video inside the presentation or only link to it. According to Microsoft’s insert and play article, linking keeps the file smaller but links can break, for example when the deck is copied to a USB drive or emailed without the video.

  1. Open File > Info. Under Optimize Media Compatibility, select View Links to see where each linked file is stored.
  2. Copy the video into the same folder as the presentation, which Microsoft recommends for linked media.
  3. If the path still points to the old location, delete the video from the slide and insert it again from the new folder.

To avoid the problem, embed the video instead. Select the slide, choose Insert > Video > This Device (named Video on My PC in some versions), pick the file and select Insert. Microsoft’s playback tips page calls embedding the way to make sure the video plays, with a larger file as the trade-off. To link on purpose, use the arrow next to Insert and choose Link to File.

Fix 3: Upgrade media in older presentations

A deck first saved in an older PowerPoint version may keep its videos in a legacy form. Microsoft’s playback tips page says upgrading the file can improve playback, and that the upgrade updates and embeds the media for you.

  1. Save a copy of the presentation first, so you keep the original.
  2. Select File > Info > Convert Document. The button is shown only when the file is in an older format.
  3. Play the slide again. You can also double-click a legacy video on its own to open a dialog that offers to upgrade it.

As general guidance, the Optimize Media Compatibility area on the same Info page may also offer to optimize media that could have playback problems on other devices. If you see that button, select it and wait for the progress to finish before saving.

Fix 4: Check when the video is set to start

Sometimes the video is fine and only the start option is off. Select the video, open the Playback tab and look at the Start list. The insert and play article describes three choices:

  • In Click Sequence: the default. The video plays at the next step of the show, when you click, press Spacebar or press the Right arrow key.
  • Automatically: the video plays as soon as the slide appears. Any animations placed before it run first, so a long animation can look like a delay.
  • When Clicked On: the video plays only when you click the video itself.

If you click elsewhere on the slide and the show moves to the next slide, the video may be set to When Clicked On. Switch to Automatically if you want it to run on its own. As general guidance, also check the Animation Pane on the Animations tab for a play trigger that is out of order.

Fix 5: Stop stuttering, lag and black frames

When a clip plays but looks choppy, freezes or loses sync with the sound, Microsoft’s playback tips page points to the graphics setup and the size of the media:

  • Hardware graphics acceleration: go to File > Options > Advanced and, under Display, make sure Disable hardware graphics acceleration is cleared. As general guidance, if the box is already cleared and video shows black on one PC only, ticking it as a test may show whether the graphics driver is involved; clear it again afterward.
  • Video driver: keep the graphics card driver up to date from the card or PC maker. Our guide on how to update drivers in Windows 11 shows where to get the current one.
  • File size: compress the media in the presentation. As general guidance, the Compress Media button appears under File > Info once a deck holds video.
  • Effects: limit shadows, reflections, glow, soft edges, bevels and 3-D rotation on the video.
  • Resources: close other programs and check there is enough free disk space on the PC you present from.

If the picture plays but you hear nothing, check the volume button on the video’s toolbar and the Volume setting on the Playback tab. If other apps are silent too, the problem is with Windows sound rather than PowerPoint; see no sound in Windows 11.

Fix 6: Clear the TEMP folder

Microsoft’s tips page says a TEMP folder full of files can slow PowerPoint. Clearing it is a low-risk step:

  1. Close PowerPoint and other programs.
  2. Press Windows + R to open Run, type %temp% and select OK.
  3. Select the leftover .tmp files and press Delete. Skip any file Windows says is in use.

As general guidance, files in this folder are temporary copies apps create, so deleting the ones not in use doesn’t remove your documents. Don’t delete anything outside the folder that opens.

Fix 7: Online videos and other computers

As general guidance, a YouTube or other online video inserted with Insert > Video > Online Videos streams during the show and isn’t stored in the file. It may show a blank frame when the PC is offline, when the network blocks the site, or when the owner removes the video. Test the connection at the venue before you present, as Microsoft suggests for linked media, or keep a downloaded copy you have the right to use and embed that instead.

If the deck plays on your PC but not on another one, check these points:

  • The video is embedded, not linked (Fix 2).
  • The video is MP4 with H.264 and AAC, so it doesn’t depend on extra codecs installed on your PC (Fix 1).
  • The other PC runs a supported PowerPoint version. As general guidance, PowerPoint for the web and the mobile apps may handle fewer formats than the desktop app.

Fix 8: Update or repair Office

If no video plays in any presentation, even an MP4 that plays fine in the Windows Media Player app, the Office install itself may be at fault. As general guidance, install the latest Office updates from File > Account > Update Options > Update Now first. If that doesn’t help, run a Quick Repair or Online Repair as shown in our guide to repairing Microsoft Office.

PowerPoint for Mac

The supported formats article notes that macOS plays a wider range of formats, including some AVI, MPEG, AIFF and AU files, though some AVI files may need extra codecs. Windows Media files (.wmv and .wma) don’t play on a Mac. Microsoft suggests converting them with a third-party tool or uploading them to Microsoft Stream. An MP4 with H.264 and AAC is the safest choice for a deck that moves between Windows and Mac.

Official sources

How we write our guides: read our editorial policy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *