Audio crackling or popping in Windows 11: how to fix it

Quick answer: Open Settings > System > Sound, select your speakers or headphones under Output and set Audio enhancements to Off. If the crackling stays, pick a different Default format on the same page, clear Allow applications to take exclusive control of this device in the older Sound control panel, and update or reinstall the audio driver. When the pops come in bursts while the PC is busy, check the power plan and look for a driver that holds up audio processing.

Applies to: Windows 11 (and Windows 10, where the same settings exist) with built-in speakers, a headphone jack, HDMI or DisplayPort audio, a USB headset or DAC, or Bluetooth headphones. If there is no sound at all rather than bad sound, start with our guide on no sound in Windows 11 instead.

Match what you hear

Crackles, pops, clicks and short drop-outs sound alike but can have different causes. The pattern points to where to start:

What you hearPossible causeGo to
Crackling on every app and every soundEnhancements, format or driverFixes 2, 3 and 5
Only one app crackles (a game, DAW or player)That app using exclusive mode or its own output settingFixes 1 and 4
Pops when the PC is busy or a download runsPower saving or a slow driverFixes 7 and 8
Started after a Windows or driver updateNew audio driverFix 5
Only on Bluetooth or USB headphonesWireless link, USB port or headset modeBluetooth and USB headsets
Crackle when you move the plug or cableCable, jack or portWhen it’s the hardware

Fix 1: Narrow down where the noise comes from

A few quick tests tell you whether to look at Windows, one app or the hardware, which saves time on the later steps. As general guidance:

  • Another app: play the same audio in a different app, for example a browser and a media player. If only one app crackles, check its own audio settings and see Fix 4.
  • Another output: switch between speakers and headphones with the arrow next to the volume slider in quick settings (Windows + A). Noise on one device only points to that device, its cable or its port.
  • Restart: a full restart may clear a stuck audio session; do this once before changing settings.
  • Under load or idle: note whether the pops get worse while a game, video call or large copy is running. That pattern matters for Fixes 7 and 8.

Fix 2: Turn off Audio enhancements

Audio enhancements are extra processing (such as bass boost or virtual surround) that the driver or Windows applies to the signal. Microsoft’s guide to distorted or crackling audio names them as a possible cause of distortion or crackling on some devices and lists turning them off first:

  1. Open Start > Settings > System > Sound.
  2. Under Output, select the device that crackles.
  3. Scroll to Advanced settings and set Audio enhancements to Off.
  4. Play something and listen again.

This setting is per device, so repeat it for each output you use. If your PC has a manufacturer audio app (from Realtek, Dolby, DTS or the laptop maker), it may have its own effects switch; as general guidance, turn those off too while testing, then add them back one at a time if you miss them.

Fix 3: Change the default format

The default format is the sample rate and bit depth Windows uses when it mixes sound for a device. Microsoft says an unsupported or incorrect format can lower sound quality, and suggests trying a different one:

  1. Open Settings > System > Sound and select your output device.
  2. Under Default format (in the device’s advanced section), choose another option, for example a lower sample rate such as 16 bit, 48000 Hz.
  3. Test playback. Try a few options if the first one doesn’t help.

The same setting is in the older Sound control panel: press Windows + R, type mmsys.cpl, open the device’s Properties on the Playback tab and use the Advanced tab. As general guidance, matching the format to the audio you play most (48000 Hz for video and games, 44100 Hz for music) may reduce the work Windows does to convert the signal, which can help on slower or heavily loaded PCs.

Fix 4: Turn off exclusive mode

Normally Windows mixes all apps in shared mode. In exclusive mode, one app takes sole use of the device, which developers choose mainly for lower latency. Microsoft’s developer documentation on exclusive-mode streams explains that low-latency streams can glitch when they push the hardware past its timing limits or compete with high-priority tasks, and that exclusive mode silences system sounds and other apps. If a game, music app or recording tool crackles while everything else is clean, turning exclusive access off is a quick test:

  1. Press Windows + R, type mmsys.cpl and press Enter.
  2. On the Playback tab, select your device and choose Properties.
  3. On the Advanced tab, clear Allow applications to take exclusive control of this device.
  4. Select OK, then restart the app.

As general guidance, the app then plays through the shared Windows mixer, with slightly more delay. If you need exclusive mode for recording or audio work, leave it on and try raising the buffer size in that app’s audio settings, which gives the system more time to deliver each block of sound.

Fix 5: Update, roll back or reinstall the audio driver

A faulty or mismatched driver can distort sound. Microsoft’s Fix sound or audio problems in Windows page covers each option in Device Manager, under Sound, video and game controllers:

  • Update: right-click the audio device, choose Update driver and then Search automatically for drivers. If nothing is found, check the PC or motherboard maker’s support page.
  • Roll back: if the crackling began after an update, open the device’s Properties, go to the Driver tab and select Roll Back Driver.
  • Reinstall: right-click the device, choose Uninstall device, select the option to attempt to remove the driver, then restart so Windows sets it up again.
  • Generic driver: choose Update driver > Browse my computer for drivers > Let me pick from a list of available drivers on my computer and select the Windows High Definition Audio Device driver as a test.

Save your work before restarting. For when to use Windows Update versus the maker’s driver, see how to update drivers in Windows 11. As general guidance, chipset, graphics (for HDMI and DisplayPort audio) and network drivers may affect audio timing too, so update them from the PC maker as well.

Fix 6: Restart the audio services

Restarting the services behind Windows sound may clear a temporary glitch without a full restart:

  1. Press Windows + R, type services.msc and press Enter.
  2. Right-click Windows Audio and select Restart; confirm with Yes if asked.
  3. Do the same for Windows Audio Endpoint Builder, then test the sound.

Fix 7: Check power settings

As general guidance, aggressive power saving may let the processor or a USB port slow down between bursts of work, and audio that has to arrive on time can then break up. These checks are safe to try and easy to undo:

  • Power mode: in Settings > System > Power & battery, set Power mode to Best performance while plugged in, then listen again.
  • Minimum processor state: in Control Panel, open Power Options > Change plan settings > Change advanced power settings, expand Processor power management > Minimum processor state and raise the plugged-in value (for example to 100%) as a test. Set it back afterward if nothing changes, because it may increase heat and power use.
  • USB power saving: for a USB headset or DAC, in the same dialog expand USB settings > USB selective suspend setting and set it to Disabled, if your plan shows it.

On laptops, some of these options may be hidden or managed by the maker’s own power app. Test with the charger connected, since battery-saving modes may change processor behavior.

Fix 8: Look for a driver that delays audio

Audio is produced in small blocks that must be ready on time. As general guidance, if another driver (network, storage, graphics or a USB device) keeps the processor busy at high priority for too long, a block may be late and you hear a click or a short gap. Signs of this include pops that line up with network activity, a game loading or a device being plugged in.

  1. Open Task Manager and watch System interrupts on the Processes tab; a value that stays high may point to a driver or device problem. Our guide on system interrupts high CPU shows how to track it down.
  2. Temporarily turn off Wi-Fi or unplug USB devices you don’t need (one at a time) and see whether the crackling stops.
  3. Update or roll back the driver for whatever made a difference.
  4. Third-party latency monitoring tools may show which driver takes the longest; use them only from the developer’s own site.

Bluetooth and USB headsets

Wireless and USB audio add their own links in the chain. As general guidance:

  • Bluetooth: keep the headphones close to the PC with a clear line of sight, and move away from Wi-Fi routers, USB 3 hubs and other 2.4 GHz devices that may interfere. If sound turns rough only on calls, the headset may have switched to its hands-free mode, which has lower audio quality; pick the stereo entry for listening. For pairing and adapter problems, see Bluetooth not working in Windows 11.
  • USB: plug the headset or DAC straight into a port on the PC rather than a hub or front-panel port, try a different port, and apply the USB power setting in Fix 7. If the device drops out completely or shows an error in Device Manager, see USB audio device shows Code 10 in Windows 11.

When it’s the hardware

If the noise changes when you move the cable or plug, the fault may be in the cable, the plug or the jack. As general guidance, try other headphones or speakers on the same port and the same headphones on another device. Crackling that remains in Safe Mode, or on a freshly started PC with no apps open and enhancements off, may point more toward hardware than settings. In that case, contact the PC or headphone maker, especially while the device is under warranty.

Official sources

How we write our guides: read our editorial policy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *