Quick answer: If Windows Hello fingerprint stops working, sign in once with your PIN. Microsoft says that after several failed scans the fingerprint may be locked out for a while, and only signing in with another method such as the PIN brings it back; restarting the PC does not. Then go to Settings > Accounts > Sign-in options > Fingerprint recognition (Windows Hello), select Add a finger or remove and set up your fingerprints again. If the fingerprint option is missing, check that Windows still sees the reader in Device Manager, that a PIN is set up, and that a work policy isn’t blocking biometrics.
In this guide
- Match your symptom
- Fix 1: Sign in with your PIN to unlock the fingerprint
- Fix 2: Clean the sensor and add another finger
- Fix 3: Remove your fingerprints and enroll again
- Fix 4: The fingerprint option is missing or unavailable
- Fix 5: Check the fingerprint reader driver
- Fix 6: Check the Windows Biometric Service
- Fix 7: Fingerprint stopped after a Windows update
- Work or school PCs
- Related guides
Applies to: Windows 11 laptops with a built-in fingerprint reader (on the power button, keyboard or palm rest) and desktops or laptops with a USB fingerprint reader. Before you start: make sure you know your PIN and your account password, because several steps ask you to sign in without your fingerprint.
Match your symptom
As general guidance, fingerprint problems fall into two groups: the reader works but doesn’t match your finger, or Windows can’t use the reader at all. Pick the row closest to what you see.
| What you see | Where to look | Go to |
|---|---|---|
| “Your fingerprint couldn’t be recognized. Try using a different finger.” | Dirty or wet sensor, weak enrollment | Fixes 1, 2, 3 |
| Fingerprint worked, then stopped offering itself at sign-in | Lockout after failed scans | Fix 1 |
| No Fingerprint recognition entry, or it says the option is unavailable | No PIN, reader not detected or blocked | Fix 4 |
| Touching the sensor does nothing at all | Driver, power or service | Fixes 5, 6 |
| Problems began right after an update | Driver or update change | Fix 7 |
| Company laptop, setting grayed out or missing | Organization policy | Work or school PCs |
If your PC has a face camera and that is the part failing, see Windows Hello face recognition not working instead.
Fix 1: Sign in with your PIN to unlock the fingerprint
Windows protects biometric sign-in against repeated guessing. According to Microsoft’s Windows Hello for Business FAQ, after several failed attempts a method such as fingerprint may become temporarily unavailable, and the number of allowed failures can’t be changed by you or your organization. The same FAQ states that restarting the device doesn’t restore it. Signing in with another method, such as your PIN, does.
- At the sign-in screen, select Sign-in options and choose the PIN keypad icon.
- Enter your PIN. If you don’t remember it, use I forgot my PIN and follow the prompts.
- Lock the PC with Windows + L and try your fingerprint again.
Microsoft’s Configure Windows Hello page also notes a change rolling out to Windows 11 from November 2026 through January 2027: when face or fingerprint doesn’t recognize you right away, a PIN entry option appears next to it, so you don’t have to hunt for it.
Fix 2: Clean the sensor and add another finger
When the scan doesn’t read properly, or you touch the sensor with a finger you never enrolled, Windows shows “Your fingerprint couldn’t be recognized. Try using a different finger.” Microsoft’s Windows Hello troubleshooting tips suggest these steps:
- Keep the reader clean and dry. As general guidance, wipe it with a soft, lint-free cloth and dry your hands; damp, greasy or very dry skin may not read well.
- Enroll more than one finger, so you have a backup if one finger is cut, bandaged or wet.
- When you enroll, capture different angles of the finger, including the edges, so a quick touch at a slight tilt still matches.
- Check for driver updates for the reader (see Fix 5).
To add a finger, sign in with your PIN, then go to Settings > Accounts > Sign-in options > Fingerprint recognition (Windows Hello) and select Add a finger. As general guidance, place the whole pad of the finger flat on a touch sensor rather than just the tip, and on a swipe sensor move at a steady, moderate speed.
Fix 3: Remove your fingerprints and enroll again
If adding a finger doesn’t help, start again from a clean enrollment. Microsoft’s FAQ says that selecting Remove unenrolls you from the biometric method and deletes the stored template file, so this clears out any damaged or poor-quality scan.
- Sign in with your PIN or password.
- Open Settings > Accounts > Sign-in options. You can also press Windows + R, type
ms-settings:signinoptionsand press Enter. - Expand Fingerprint recognition (Windows Hello) and select Remove.
- Select Set up in the same place and follow the prompts. Lift and replace your finger each time Windows asks, shifting it slightly so the sensor sees the whole print.
- Add a second finger before you close Settings.
Your fingerprint data stays on the device. Microsoft’s FAQ says the enrollment is stored locally in an encrypted database, doesn’t roam to other PCs, and some external readers keep it on the reader itself. That is why a new PC, or a reset one, always needs a fresh enrollment.
Fix 4: The fingerprint option is missing or unavailable
When Fingerprint recognition (Windows Hello) is missing from Sign-in options, or it shows “This option is currently unavailable”, Windows can’t use the reader for sign-in. Check these in order.
Is a PIN set up?
Microsoft’s FAQ describes the PIN as the fallback for biometrics and states that disabling or hiding the PIN credential provider disables biometrics too. As general guidance, set up or repair your PIN under Sign-in options > PIN (Windows Hello) first. If the PIN itself shows the unavailable message, follow Windows Hello PIN: this option is currently unavailable, which covers the Ngc folder reset; fingerprint may return once the PIN works.
Does Windows see the reader?
Microsoft’s Configure Windows Hello page says fingerprint sign-in requires a fingerprint reader, and that you can buy a USB one if your device has none. Right-click Start, select Device Manager and look for a Biometric devices category. As general guidance, a working reader may appear there under a name such as “Synaptics”, “Goodix”, “ELAN” or a generic fingerprint sensor; names vary by maker.
- No Biometric devices category: select Action > Scan for hardware changes. If nothing appears, the reader may be switched off in the BIOS or UEFI setup, or missing its driver (Fix 5).
- A yellow warning icon: the driver failed to start. Open the device, read the status on the General tab and go to Fix 5.
- A USB reader that keeps disconnecting: try another USB port directly on the PC, not a hub, and see USB device not recognized in Windows 11.
Is something blocking it?
If the reader is listed but the option is grayed out or Windows says the sign-in method is disabled, a policy may be switching biometrics off. See This sign-in option is disabled for home PCs, and the work section below for company devices.
Fix 5: Check the fingerprint reader driver
Microsoft’s tips list checking for driver updates as a fingerprint fix. As general guidance, the safest source for a built-in reader driver is your PC maker’s support page for your exact model, because laptop makers may package the sensor driver with their own settings.
- Open Settings > Windows Update > Advanced options > Optional updates and install any driver listed for the fingerprint or biometric device.
- If nothing is offered, download the fingerprint or biometric driver from your PC maker’s support site and install it.
- In Device Manager, right-click the reader under Biometric devices, select Uninstall device, then restart. As general guidance, Windows may reinstall a working driver at startup. Only tick the option to delete the driver software if you have the maker’s driver ready to reinstall.
- For a USB reader, open its properties in Device Manager and, if there is a Power Management tab, clear Allow the computer to turn off this device to save power. As general guidance, this may stop the reader from going to sleep and ignoring touches.
Our guide on how to update drivers in Windows 11 explains each driver source and when not to replace a working driver.
Fix 6: Check the Windows Biometric Service
As general guidance, Windows Hello biometric sign-in relies on the Windows Biometric Service. If a tune-up tool or a guide turned it off, fingerprint may stop working everywhere.
- Press Windows + R, type
services.mscand press Enter. - Double-click Windows Biometric Service.
- If Startup type is Disabled, set it back to Manual and select Apply.
- Select Start if it is available, then restart the PC and try the fingerprint.
The service may show as stopped when nothing is using it; that alone isn’t a fault. Change the startup type only if it was set to Disabled.
Fix 7: Fingerprint stopped after a Windows update
Microsoft’s tips say that being asked to create a PIN again may follow security updates or system changes. Because fingerprint depends on the PIN (Fix 4), set the PIN up again when Windows asks, then try the fingerprint.
If the reader stopped responding right after a driver update, open it in Device Manager, go to the Driver tab and select Roll Back Driver if it is available. As general guidance, then check your PC maker’s site for a newer driver rather than leaving the old one in place for good. If only a Windows quality update changed and the driver is the same, finish installing any pending updates under Windows Update and restart, then remove and re-enroll your fingerprints (Fix 3).
Work or school PCs
Microsoft’s FAQ says administrators can disallow biometric enrollment through Windows Hello for Business policy, and that when biometrics are allowed, enrolling is optional. On a company laptop, a missing or grayed-out fingerprint option may be a deliberate setting, not a fault. Don’t try to change Group Policy or registry values on a managed device. Ask your IT team whether fingerprint sign-in is allowed, and give them the device name and the exact message you see.
If the PC belongs to you but was once joined to work or school, check Settings > Accounts > Access work or school. As general guidance, an old connection there may still apply sign-in policies; disconnect it only if you no longer need that account on the PC.
Related guides
- Windows Hello face recognition not working: how to fix it
- Windows Hello PIN “This option is currently unavailable”: how to fix it
- This sign-in option is disabled: how to fix it in Windows 11 and 10
- How to update drivers in Windows 11 (and when not to)
- USB device not recognized in Windows 11: how to fix it
Leave a Reply