Quick answer: start with the physical checks Microsoft lists first: make sure an external webcam is firmly plugged in and that any privacy shutter, camera key or side switch is set to on. Then open Settings > Privacy & security > Camera and turn on Camera access, Let apps access your camera and Let desktop apps access your camera. Test in the Windows Camera app: if it works there, the problem sits in the other app. If it fails everywhere, run the camera troubleshooter, install optional driver updates, and roll back or reinstall the camera driver in Device Manager.
In this guide
- Match your symptom
- Fix 1: Check the cable, port and privacy shutter
- Fix 2: Turn on camera access in Privacy settings
- Fix 3: Test the webcam in the Camera app
- Fix 4: Run the camera troubleshooter
- Fix 5: Close apps that hold the camera
- Fix 6: Check antivirus camera protection
- Fix 7: Install Windows and optional driver updates
- Fix 8: Roll back or reinstall the camera driver
- Fix 9: Switch to the USB Video Device driver
- Fix 10: Turn on Basic camera mode
- Camera error codes
- Known issues
- Related guides
Applies to: built-in laptop cameras and USB webcams on Windows 11. Microsoft’s main troubleshooting page covers Windows 10 as well, but the Camera settings page and Basic camera mode exist only in Windows 11. If the camera fails only in Microsoft Teams, our Teams camera guide covers the Teams settings. If Windows shows error 0xA00F4244 and finds no camera at all, go straight to our 0xA00F4244 guide.
Match your symptom
A webcam can fail at three levels: the hardware (Windows doesn’t see it), permissions (Windows sees it but blocks apps), or one app’s own settings. Find your symptom below to skip ahead. This table maps the guide; it’s not a list from Microsoft.
| What you see | Likely area | Go to |
|---|---|---|
| Black image or a camera icon with a line through it | Shutter, switch or key | Fix 1 |
| Apps say they can’t find or use the camera | Privacy permissions | Fix 2 |
| Works in the Camera app, fails in one other app | That app’s settings | Fix 3 |
| Error says the camera is in use | Another app holds it | Fix 5 |
| Stopped working after an update | Driver | Fixes 7 and 8 |
| Picture freezes, glitches or shows effects you didn’t set | Plug-ins or acceleration | Fix 10 |
| Webcam missing from Device Manager | Connection or detection | Fix 1 and the 0xA00F4244 guide |
Fix 1: Check the cable, port and privacy shutter
Microsoft’s page Camera doesn’t work in Windows starts with the hardware. Its checks:
- For an external webcam, confirm the USB plug is seated firmly and the cable isn’t loose or damaged. Try a different USB port too.
- Look for a physical privacy control and make sure it’s in the on position. Microsoft names several forms: an on/off switch, a slider over the lens, a switch on the side of the laptop, a dedicated key or an Fn key combination.
- Try the webcam on another computer. If it fails there as well, the camera itself may be faulty.
As general guidance, a closed shutter can look like a software fault, because apps still detect the camera and simply show a black or gray frame. Laptop camera keys can carry a camera icon with a slash through it, so check the function row before changing settings. If Windows doesn’t react at all when you plug in a USB webcam, our guide to USB device not recognized covers port and hub problems.
Fix 2: Turn on camera access in Privacy settings
Windows has three separate switches, and an app needs the right one turned on. Microsoft’s page on managing app permissions for a camera describes them:
- Open Start > Settings > Privacy & security > Camera.
- Turn on Camera access. If you can’t change it, an administrator has to turn it on for the device.
- Turn on Let apps access your camera, then check that the app you want is switched on in the list below it. This list covers Microsoft Store apps.
- Turn on Let desktop apps access your camera. Microsoft says browsers such as Microsoft Edge and video apps such as Microsoft Teams need this setting, and that you can’t allow or block desktop apps one by one.
If your app isn’t in the list, Microsoft notes that it may be a desktop app, which is controlled by the desktop apps switch instead. The troubleshooting page also says newer versions of Windows 11 may not give apps camera access by default, so check these switches after a feature update.
As general guidance, a browser adds its own camera permission per website. If the camera works in desktop apps but not on one site, check the camera permission in the browser’s site settings (the icon next to the address bar) before changing anything in Windows.
Fix 3: Test the webcam in the Camera app
Open Start > Camera. Microsoft’s troubleshooting page says that if the camera works in the Camera app but not in another app, the problem is with that app’s settings. That one test tells you whether to keep working on Windows or move to the app.
As general guidance, the next step in that case is the app’s own video settings: pick the right camera from its device list (laptops with an external webcam attached show two), and check that the app isn’t set to a virtual camera from streaming or effects software. For Teams, see Teams camera not working.
Fix 4: Run the camera troubleshooter
Microsoft points Windows 11 users to the automated camera troubleshooter in the Get Help app. There are two ways to reach it:
- Go to Start > Settings > System > Troubleshoot > Other troubleshooters, find Camera and select Run.
- Or open Settings > Bluetooth & devices > Cameras, select your camera and use the Troubleshoot button. Microsoft’s camera settings page says this button launches the same Get Help troubleshooter.
The Cameras page is also worth a look in its own right. Microsoft says a camera that has been turned off there appears in a separate disabled section, where you can turn it back on with administrator access. It also notes that a camera disabled in Device Manager, missing a driver or not working may not appear on this page at all.
Fix 5: Close apps that hold the camera
Microsoft lists error codes 0xA00F4243, 0xA00F4289 and 0x80070005 for a camera that’s in use or access is denied. Its advice is to close other apps that might be using the camera, ending them in Task Manager if needed, and then to check the privacy settings and security software.
- Press Ctrl + Shift + Esc to open Task Manager.
- Look for video calling, streaming or recording apps that are still running, including ones minimized to the notification area.
- Select each one and choose End task, then try the camera again.
On Windows 11 24H2 and later, Microsoft’s camera settings page describes a Multi-app camera mode under Advanced camera options that lets several apps use the camera at once. Your organization may manage these options on a work PC.
Fix 6: Check antivirus camera protection
As general guidance, some security suites include a webcam protection feature that can block apps from the camera. Microsoft’s troubleshooting page suggests looking for settings that block camera access in your antivirus, turning them off for a short test, and checking the security vendor’s website for help. It ties error 0xA00F4246 to a camera locked by security software.
Warning: turn the protection back on as soon as the test is done. If the camera works only while it’s off, allow your video app in the antivirus settings rather than leaving protection disabled.
Fix 7: Install Windows and optional driver updates
Microsoft’s troubleshooting page points to optional updates as a place where camera driver updates can appear. Its steps:
- Go to Start > Settings > Windows Update and select Check for updates.
- Open Advanced options > Optional updates and install any camera driver updates listed there.
- Restart the PC. Microsoft notes that sleep isn’t the same as a restart.
As general guidance, the support site of your laptop or webcam maker can also carry a newer driver or a companion app. Our guide on how to update drivers in Windows 11 explains where to look and when to leave a working driver alone.
Fix 8: Roll back or reinstall the camera driver
If the webcam stopped after an update, Microsoft’s page recommends these Device Manager steps:
- Search for Device Manager from Start and open it.
- Find the webcam under Cameras, Imaging devices or Sound, video and game controllers. If it isn’t there, select Action > Scan for hardware changes.
- Right-click the webcam, select Properties and open the Driver tab.
- If Roll Back Driver is available, select it, follow the prompts and restart. Microsoft notes some drivers don’t offer this option.
- If rolling back isn’t possible or doesn’t help, select Uninstall Device, check Attempt to remove the driver for this device and select OK. Then choose Action > Scan for hardware changes and restart so Windows installs the driver again.
Fix 9: Switch to the USB Video Device driver
Windows includes its own general webcam driver, listed as USB Video Device. Microsoft’s page describes switching to it as a driver step for webcams; as general guidance, it’s worth trying when the maker’s driver is the suspect. You need administrator rights.
Warning: Microsoft says Windows Hello face recognition may stop working after this change. If you sign in with your face, read our Windows Hello face recognition guide first, and keep the original driver name noted so you can switch back.
- In Device Manager, right-click the webcam and select Update driver.
- Select Browse my computer for drivers, then Let me pick from a list of available drivers on my computer.
- Choose USB Video Device, select Next, then Close.
- Test the webcam in the Camera app.
As general guidance, if USB Video Device isn’t in the list, the webcam may not support the standard driver, and this fix doesn’t apply.
Fix 10: Turn on Basic camera mode
On Windows 11 24H2 and later, Microsoft describes Basic camera as a troubleshooting option. According to its camera settings page, it turns off hardware acceleration and manufacturer plug-ins, turns on multi-app mode and disables Windows Studio Effects. Windows Hello face recognition bypasses it.
- Open Settings > Bluetooth & devices > Cameras and select your webcam.
- Select Advanced camera options, then Edit.
- Turn on Basic camera and test again.
As general guidance, if Basic camera mode fixes it, the maker’s add-on software or hardware acceleration is the place to look. Microsoft suggests reporting such problems in Feedback Hub under Devices and Drivers > Device Camera or Webcams. Check the maker’s site for an updated driver or companion app too, and turn Basic camera off again to see whether the update helped.
Camera error codes
Microsoft’s troubleshooting page pairs common camera error codes with a direction to try. A short version:
| Error code | What Microsoft ties it to | Start with |
|---|---|---|
| 0xA00F4244 | Camera not detected | Our 0xA00F4244 guide |
| 0xA00F4243, 0xA00F4289, 0x80070005 | Camera in use or access denied | Fixes 5, 2 and 6 |
| 0xA00F4292 | Blocked by policy | Ask your IT admin |
| 0xA00F4246 | Locked by security software | Fix 6 |
| 0x800705AA | Not enough system resources | Close apps, restart, Fix 7 |
| 0xA00F4294 | Video stream failed to start | Fix 7, then the Camera app |
| 0xC00D7167 | Restart required | Save work and restart |
Known issues
If the webcam stopped right after a Windows update, check the Windows release health dashboard on Microsoft Learn for the version you’re running. Microsoft lists confirmed problems and their workarounds there. Until a fix arrives, rolling back the camera driver (Fix 8) or turning on Basic camera mode (Fix 10) are the steps from Microsoft’s own troubleshooting pages that fit a fault that began with an update.
Related guides
- Camera Error 0xA00F4244 (NoCamerasAreAttached): How to Fix It
- Teams camera not working: how to fix it on Windows 11
- Windows Hello face recognition not working: how to fix it
- USB Device Not Recognized in Windows 11: How to Fix It
- How to update drivers in Windows 11 (and when not to)
Leave a Reply