Quick answer: restart the PC first, since Microsoft lists that as the first thing to try. If touch is still dead, right-click Start, open Device Manager, expand Human Interface Devices and check HID-compliant touch screen: enable it if it’s disabled, or uninstall it and choose Action > Scan for hardware changes so Windows reinstalls it. Then install every update, including the optional ones, from Settings > Windows Update. Touches that land in the wrong place call for calibration, phantom taps for a check of the screen surface and nearby electronics, and a screen that ignores touch even outside Windows may have a hardware fault.
In this guide
- Match your symptom
- Fix 1: Restart the PC
- Fix 2: Turn the touch screen device back on
- Fix 3: Reinstall the touch screen driver
- Fix 4: Install Windows and optional updates
- Fix 5: Calibrate touches that land in the wrong spot
- Fix 6: Check pen and tablet settings
- Fix 7: Stop ghost touches
- Fix 8: Rule out a hardware fault
- If you’d rather turn touch off
- Related guides
Applies to: Windows 11 laptops, 2-in-1s, tablets and all-in-one PCs with a built-in touch screen. Microsoft’s touchscreen page shows the same steps for Windows 10, so most of this guide is likely to work there too. If the problem is the touchpad below the keyboard rather than the screen, see our touchpad guide instead.
Match your symptom
| What you see | Possible cause | Go to |
|---|---|---|
| Touch stopped after sleep or a long session | A glitch that a restart can clear | Fix 1 |
| Touch doesn’t respond at all, mouse and keyboard fine | Touch device disabled, or its driver failed | Fix 2, Fix 3 |
| No touch screen entry in Device Manager | Driver missing, or touch switched off in the firmware | Fix 2, Fix 3 |
| Touch broke after an update | Driver or firmware change | Fix 3, Fix 4 |
| Taps register a short distance from your finger | Calibration is off | Fix 5 |
| Touch stops while you use a pen | Pen setting that ignores touch | Fix 6 |
| Taps and swipes happen on their own | Screen protector, dirt, moisture or electrical interference | Fix 7 |
| Touch also fails before Windows starts, or after a drop or spill | Hardware fault | Fix 8 |
Fix 1: Restart the PC
Microsoft’s troubleshooting steps start with a restart, and it’s worth doing before anything else. A restart reloads drivers and services, which can clear a stuck state left by sleep or hibernation.
Use Start > Power > Restart rather than closing the lid. Once Windows is back, test touch in more than one place, for example by scrolling and pinching to zoom in a browser, which is how Microsoft suggests checking touch on a Surface.
Fix 2: Turn the touch screen device back on
Windows treats the touch panel as a device called HID-compliant touch screen. If it has been disabled, by you, by another user or by a tool, the screen won’t respond even though everything else works.
- Right-click Start and select Device Manager.
- Expand Human Interface Devices.
- Look for HID-compliant touch screen. Some PCs list two of these entries.
- A small down-arrow on the icon usually means the device is turned off. Right-click it and select Enable device.
If you can’t see any touch screen entry, it can help to open View > Show hidden devices; if it’s still missing, go to Fix 3.
Check the firmware setting
Some PCs can switch the touch screen off in the BIOS or UEFI setup, and it can then be missing from Windows entirely. Dell says its laptops have a Touchscreen setting under Advanced > Display, reached by pressing F2 at startup. Other brands use different keys and menu names, so check your PC maker’s support site if you’re not sure where to look.
Fix 3: Reinstall the touch screen driver
If the device is enabled but touch still doesn’t work, removing the driver and letting Windows detect the hardware again gives it a clean start. Microsoft’s Surface page lists these steps:
- In Device Manager, expand Human Interface Devices.
- Right-click HID-compliant touch screen and select Uninstall device. Repeat for a second HID-compliant touch screen entry if there is one.
- Select Action > Scan for hardware changes to reinstall the driver.
- Test touch again, then restart if it still doesn’t respond.
On a Surface, Microsoft also lists Intel(R) Precise Touch Device for removal, and it warns not to use these steps on a Surface Pro X.
If Windows can’t find a working driver, get the touch or chipset driver from your PC maker’s support page for your exact model. Microsoft points Surface owners to its Surface drivers and firmware downloads for the same reason. Our guide on how to update drivers in Windows 11 explains how to install one and how to roll back a driver that an update replaced.
Fix 4: Install Windows and optional updates
Driver and firmware fixes for touch panels may arrive through Windows Update, sometimes as optional updates. Microsoft’s touchscreen page gives this order:
- Right-click Start and go to Settings > Windows Update > Advanced options.
- Make sure Receive updates for other Microsoft products is on.
- Under Additional options, select Optional updates, select all of them, and choose Download and install.
- Go back to Windows Update, select Check for updates and install everything offered.
- Restart, even if no update asked for a restart.
If Windows Update won’t find anything or hangs, see how to force Windows Update to check for updates. Surface owners can also check for firmware in the Surface app under Help & support, according to Microsoft. Other brands often ship firmware through their own update apps.
Fix 5: Calibrate touches that land in the wrong spot
When the screen reacts but your taps register a little to one side, or the offset grows toward the edges, calibration is worth a try. On many touch PCs, Control Panel includes a calibration tool. Exact labels can vary between Windows builds:
- Open Control Panel (search for it from Start) and set View by to Category.
- Select Hardware and Sound, then Tablet PC Settings.
- On the Display tab, select Calibrate and choose touch input if you’re asked.
- Tap each crosshair as it appears, then save the result.
If the result is worse, the same tab has a Reset button that should return the default calibration. If Tablet PC Settings doesn’t appear at all, Windows might not be detecting the touch hardware, which sends you back to Fix 2 and Fix 3. A touch screen that is off by the same amount after you rotate it can also be a rotation problem; see screen auto-rotate not working.
Fix 6: Check pen and tablet settings
If you use a pen, Windows can ignore your fingers while the pen is near the screen. Dell’s article points to the Ignore touch input when I’m using my pen option in Pen & Windows Ink settings, which should be under Settings > Bluetooth & devices. Turn it off, or disconnect the pen, and test touch again.
Tablet mode works differently in Windows 11 than it did in Windows 10. Dell notes there’s no manual tablet mode switch in Windows 11: on 2-in-1s that support it, Windows adjusts the layout itself when you detach or fold back the keyboard. So a missing tablet mode button on its own isn’t a sign that something is broken. If the detachable keyboard on a 2-in-1 is the part that stopped working, see keyboard not working in Windows 11.
Fix 7: Stop ghost touches
Ghost touches are taps, swipes or selections that happen without anyone touching the screen. Microsoft and Dell both tie them to the screen surface or the PC’s surroundings rather than to Windows settings, so start there:
- Remove any screen protector, privacy filter or film, which Dell lists among the things to check, and see if the phantom input stops.
- Look along the edge of the bezel for dirt or moisture. Dell suggests 70% isopropyl alcohol for adhesive residue, letting the screen dry fully; check your own PC maker’s cleaning advice before using any liquid, and turn the PC off first.
- Move the PC away from other electronics, or move them away from it. The Surface support article names interference from nearby equipment as a cause of phantom touches.
- Unplug USB devices one at a time, and take the PC off metal or other conductive surfaces, as Dell recommends.
- Try without the charger, or with the charger that came with the PC. Dell advises against using the touch screen while charging from an adapter that isn’t certified for the laptop.
If ghost touches continue after all of that, the panel itself could be failing. You can switch touch off in the meantime (see the last section) and contact the manufacturer.
Fix 8: Rule out a hardware fault
One way to separate hardware from software is to test touch outside Windows. On a Surface, Microsoft describes booting to UEFI: shut down, hold the volume up button and press the power button until the logo appears, then tap the menu items. If touch fails there, Microsoft’s page points to a hardware failure and a service request. If it works, restart into Windows; the fault is then more likely to be in Windows or the driver than in the panel.
Other brands have their own built-in diagnostics; Dell mentions SupportAssist and Dell Diagnostics, for example. Contact the maker if a diagnostic reports a failure, or if touch stopped after a drop, a spill or pressure on the screen, or the display shows visible damage.
If the hardware passes and nothing above helped, Microsoft lists resetting the PC as a final step. Back up your files first: Reset this PC reinstalls Windows and can remove your apps.
If you’d rather turn touch off
Some people disable touch on purpose, for example to stop ghost touches until a repair. Right-click HID-compliant touch screen in Device Manager and select Disable device. Dell notes this doesn’t always stick through driver reinstalls or major Windows updates, while its BIOS setting does. Microsoft’s Surface page adds that turning off touch on a Surface also disables the Surface Pen, the Surface Dial and the Windows touch keyboard.
Related guides
- Touchpad not working in Windows 11: how to fix it
- Screen auto-rotate not working in Windows 11: how to fix it
- How to update drivers in Windows 11 (and when not to)
- How to force Windows Update to check and install updates
- Keyboard not working in Windows 11: how to fix it
Leave a Reply