Quick answer: look for a small light icon on one of the top-row keys or the arrow keys, then press that key. If nothing happens, hold Fn and press it again; Dell and HP both say some models need Fn, and each press steps through the brightness levels and off. If the light comes on and then goes out after a few seconds, a backlight timeout or an ambient light sensor is switching it off. The timeout can be changed in the BIOS or UEFI setup on supported Dell and HP models, the sensor on select Dell models, and the BIOS on some models also has a switch that disables keyboard lighting entirely. If no key shows a backlight icon, your laptop may not have a backlit keyboard at all.
In this guide
- Match your symptom
- Fix 1: Check that your laptop has a backlit keyboard
- Fix 2: Press the backlight key, with and without Fn
- Fix 3: Check Fn Lock
- Fix 4: Change the backlight timeout
- Fix 5: Check the ambient light sensor
- Fix 6: Turn on keyboard illumination in BIOS or UEFI
- Fix 7: Check your laptop maker’s lighting app
- Fix 8: Update the BIOS and drivers
- Fix 9: Restart, then rule out a hardware fault
- Related guides
Applies to: laptops running Windows 11 or Windows 10 that have a backlit keyboard. The key names, BIOS menus and apps below come from Dell’s and HP’s support pages and apply to their laptops. Lenovo, ASUS, Acer, Microsoft Surface and other makers use different keys and menus, so for those models the steps are general and your maker’s support page for your exact model is the final word. If the keys themselves don’t type, see keyboard not working in Windows 11 first.
Match your symptom
| What you see | Possible cause | Go to |
|---|---|---|
| No key has a light icon, and the backlight has never worked | The model has no backlit keyboard | Fix 1 |
| Pressing the light key changes something else, or nothing | The key needs Fn, or Fn Lock is in the other state | Fix 2, Fix 3 |
| The light comes on but goes out after a few seconds | A backlight timeout is set | Fix 4 |
| The light dims or turns off on its own in a bright room | An ambient light sensor is controlling it | Fix 5 |
| No key combination turns the light on at all | Keyboard lighting is disabled in the BIOS | Fix 6 |
| A gaming laptop shows no lighting, or the wrong effect | The maker’s lighting app or its firmware | Fix 7 |
| It stopped after a Windows or BIOS change | Outdated or mismatched BIOS and drivers | Fix 8 |
| Nothing above helps, and the BIOS option is on | A fault in the backlight or keyboard cable | Fix 9 |
Fix 1: Check that your laptop has a backlit keyboard
Before changing settings, confirm the hardware is there. Dell’s support article states plainly that not all Dell laptop models include a backlit keyboard, and HP notes that backlighting varies by configuration, so two laptops with the same model name can differ.
- Look along the top row of keys (and, on some laptops, the arrow keys) for an icon of a keyboard or a small light with rays. Dell’s article describes this icon as the sign that a backlight is fitted.
- If no key has that icon, check the specifications for your exact model on the maker’s product or support page, using the serial number or service tag where the site asks for one.
- On a Dell laptop, Dell says that if the BIOS has no keyboard illumination setting (Fix 6), the backlight hardware may not be present. The same check may help on other brands, but menu names vary.
If your model was never sold with a backlit keyboard, no setting will turn one on, and the rest of this guide won’t apply.
Fix 2: Press the backlight key, with and without Fn
The backlight is controlled by the laptop’s firmware and a hotkey, not by a Windows setting, so the key press is the first thing to get right.
- Dell: Dell’s article says the backlight key is often F5, F6, F7 or F10 on Latitude, Vostro and Inspiron models, the right arrow key on some XPS models, and a dedicated key on some Alienware and high-end XPS models. Hold Fn and press that key to step through Off, Low, High and back to Off.
- HP: HP’s guide says the backlight key is usually F5 or F4. Press it on its own first; if nothing happens, hold fn and press it. Press it again to cycle through the brightness levels or turn the light off.
- Other makers: the pattern is often similar, with Fn plus a key marked with the backlight icon (sometimes the spacebar or an arrow key), but the exact key varies by model. Check the icons on your keyboard or your maker’s support page.
Press the key several times, a second or so apart. On laptops with more than one brightness level, the first press may turn the light off rather than on if it was already at the highest level.
Fix 3: Check Fn Lock
Many laptops let the top-row keys work either as F1 to F12 or as hardware controls, and Fn Lock switches between the two. If the backlight key only works with Fn, or only without it, Fn Lock decides which. On Dell laptops, Dell’s article says Fn + Esc toggles Fn Lock, so depending on the Fn Lock state you may need to press the backlight key alone or with Fn.
- Press the backlight key alone, then with Fn held down, and note which one does something.
- Toggle Fn Lock (on Dell, Fn + Esc; on other brands, look for a padlock icon on Esc or a key labeled Fn Lock) and try both again.
- Some laptops also have an action key or function key setting in the BIOS or in the maker’s app. If a key does the wrong thing every time, check that setting.
The same toggle explains why other top-row keys seem to stop working. Print Screen not working covers Fn and Fn Lock for that key in more detail.
Fix 4: Change the backlight timeout
If the light turns on when you type but goes dark a few seconds after you stop, a timeout is the first thing to check; it saves battery and is not a fault. HP’s guide points to a BIOS setting on supported models:
- Restart the laptop and press F10 repeatedly as it starts, until the BIOS setup opens.
- Use the arrow keys to open the Advanced tab, select Built-in Device Options and press Enter.
- Select Backlit keyboard timeout and press the spacebar to see the options.
- Pick a longer timeout, then save your changes and exit.
HP says choosing Never keeps the light on until you turn it off, but it may drain the battery faster, and that not every model has this setting; on some models a BIOS update adds it (Fix 8). On Dell laptops, Dell’s article lists a Keyboard Backlight Timeout setting with Always On or 5, 15, 30 or 60 seconds on some BIOS versions; Fix 6 explains how to open the Dell BIOS. If battery life matters more than a lit keyboard, a short timeout is a sensible choice; laptop battery draining fast covers other ways to save power.
Fix 5: Check the ambient light sensor
Some laptops have an ambient light sensor that adjusts the keyboard light to the room. Dell’s article says that on select Dell models the sensor adjusts backlight brightness, and that a brightness level you set by hand may be overridden after a few seconds. In a bright room, that can look as if the backlight has stopped working.
- Test in a dark room. If the keyboard lights up there but not in daylight, a sensor may be adjusting it rather than anything being broken.
- On Dell models, Dell says you can open the BIOS and set Keyboard Illumination with ALS or Ambient Light Sensor to Disabled for manual control only (the option is present on some models).
- On other brands, look for an automatic or adaptive keyboard lighting option in the BIOS or in the maker’s app (Fix 7).
The screen’s own adaptive brightness is a separate setting in Windows. If the display dims as well, see brightness not working in Windows 11.
Fix 6: Turn on keyboard illumination in BIOS or UEFI
If no key combination turns the light on, keyboard lighting may be switched off in the firmware, which overrides the hotkey.
Before you start: change only the keyboard lighting option. Other BIOS settings, such as boot or security options, can stop Windows from starting if they are changed by mistake. If you’re unsure, choose the option to exit without saving.
- Dell: shut the laptop down fully, turn it on and press F2 about once a second when the Dell logo appears. Under Keyboard, set Keyboard Illumination to Dim or Bright (the choices Dell lists are Disabled, Dim and Bright), then save and exit.
- HP: HP’s guide opens the BIOS with F10 and keeps the backlight timeout under Advanced > Built-in Device Options. HP’s page doesn’t describe a separate on/off switch, so check that area for any keyboard lighting option.
- Other makers: the key to open setup and the menu name vary (F1, F2, Del or a dedicated button are all used). In Windows 11, you can also reach UEFI settings from Windows: Settings > System > Recovery, select Restart now next to Advanced startup, then choose Troubleshoot, Advanced options and UEFI Firmware Settings, if your PC offers it.
Fix 7: Check your laptop maker’s lighting app
Gaming laptops and some premium models hand keyboard lighting to an app, and if that app has a fault, the keys may stay dark or show the wrong effect.
- Dell Alienware: Dell’s article says RGB and zone lighting on Alienware models is controlled through Alienware Command Center. Its troubleshooting steps are to update the firmware, use Reset to Default in the app and reinstall it if needed.
- HP OMEN: HP’s guide mentions the OMEN Gaming Hub and OMEN Light Studio apps for its OMEN gaming laptops. If you have an OMEN model, check its lighting settings in those apps.
- Other makers: Lenovo, ASUS, Acer, MSI and others ship their own support or control apps, and the keyboard lighting option may be in one of them. Look for a keyboard, lighting or backlight section in the app that came with your laptop, and reinstall it from the maker’s support site if it’s missing or won’t open.
If two lighting apps are installed, for example the maker’s app and a separate RGB tool, they might fight over the same keyboard. Close or uninstall the one you don’t use, then restart.
Fix 8: Update the BIOS and drivers
Keyboard lighting depends on the BIOS and on the maker’s hotkey drivers. Both Dell and HP list a BIOS update among their steps, and HP says an update can add the timeout setting on some models.
- Dell: use SupportAssist or Dell’s Drivers and Downloads page for your service tag.
- HP: use HP Support Assistant or HP Software and Driver Downloads for your model.
- Other makers: use their support app or the drivers page for your exact model, and install any BIOS, chipset and hotkey or keyboard utility updates listed there.
Before a BIOS update: connect the charger, as Dell advises, and don’t turn off or close the laptop until the update finishes and Windows starts again. A failed BIOS update can leave a laptop unable to start. For general driver advice, see how to update drivers in Windows 11.
Fix 9: Restart, then rule out a hardware fault
HP lists a restart among its steps. A full restart reloads the firmware and the hotkey software, which can clear a key that has stopped responding. Use Restart from the Start menu rather than closing the lid.
If keyboard illumination is turned on in the BIOS (Fix 6), the timeout and sensor are ruled out, and the light still never comes on, the backlight itself or its connection to the keyboard may have failed. That can happen after a spill, a drop or a keyboard replacement. A repair shop or your maker’s support team can check it, and the keyboard may be covered by warranty; HP’s guide sends readers to HP Customer Support at this point. If keys also fail to type, mention that too, since it points to the keyboard as a whole.
Related guides
- Keyboard not working in Windows 11: how to fix it
- Print Screen not working: how to fix it on Windows 11
- Brightness not working in Windows 11: how to fix it
- Laptop battery draining fast in Windows 11: how to fix it
- How to update drivers in Windows 11 (and when not to)
Leave a Reply