How to compare two documents in Word

Quick answer: To compare two documents in Word, open the Review tab, select Review > Compare and choose the option to compare two versions of a document. Pick the older file under Original document and the newer one under Revised document, then select OK. Word opens a third, new document that shows the differences as tracked changes, and Microsoft says the two files you picked stay unchanged. To merge edits from several reviewers into one file, use Combine instead.

Applies to: Word for Microsoft 365, Word 2024, Word 2021, Word 2019 and Word 2016 on Windows, the versions Microsoft lists on its page about comparing documents with the legal blackline option. The steps are written for Word on Windows 11 and 10. Word for Mac uses slightly different menu names, and Word for the web gets a short note near the end.

Before you start

Compare works on two separate files, so you need both versions saved, for example Report v1.docx and Report v2.docx. If you only have one file with tracked changes in it, you don’t need Compare at all: the edits are already recorded, and Method 4 shows how to go through them.

Give the files names that make the order obvious. Word asks which one is the original and which is the revised version, and choosing them the wrong way around makes added text show up as deleted in the result, and the other way around. Microsoft’s steps start with opening the two documents, though the dialog also lets you browse to a file that isn’t open.

Method 1: Compare two versions with Review, Compare

This is the simplest route and the one to use when you want to see what changed between an old and a new copy. Microsoft calls it the legal blackline option: Word builds a new document that marks the differences and leaves both originals as they were.

  1. Open the two documents.
  2. On the Review tab, in the Compare group, select Compare.
  3. Select Compare two versions of a document (legal blackline). In recent versions the menu item may simply read Compare.
  4. Under Original document, choose the older file. Select the folder icon next to the list if the file isn’t shown.
  5. Under Revised document, choose the newer file.
  6. Select OK.

The dialog may also show a Label changes with box under each file. Whatever name you type there should appear as the author of those changes in the result, which helps when you send the comparison to someone else. Microsoft’s page doesn’t describe this box, so treat it as optional.

If either file already contains tracked changes, Word shows a message before it compares. Microsoft explains that selecting Yes accepts those changes for the purpose of the comparison and carries on. Your saved files aren’t changed by this, but if you want to keep the earlier tracked changes visible, review them in each file first.

Method 2: Change what Word compares and where it shows the result

Before you select OK in the Compare dialog, select More to see the comparison settings. Microsoft’s page covers three choices:

  • What to compare. Check boxes let you include or leave out comments, formatting and text changes, plus other items such as tables and headers on your screen. Clearing Formatting is useful when someone restyled the document and you only care about wording.
  • Show changes at. Choose Character level to mark each changed letter, or Word level to mark whole words. Word level is easier to read when edits are scattered; character level helps with codes, numbers and spelling fixes.
  • Show changes in. The default is a New document. You can show the result in the Original document or Revised document instead, but Microsoft warns that choosing either one modifies that document.

Leave Show changes in set to New document unless you have a reason to change it. A separate result file means you can close it without saving and start over if the settings were wrong.

How to read the comparison

According to Microsoft, the new document keeps the original’s content and shows the revised version’s changes as tracked changes. Depending on your markup settings, inserted text may be underlined, deleted text struck through or shown in balloons, and formatting changes noted in the margin. The changes are attributed to the name you entered under Label changes with, if the dialog offered it.

Word may also open the two source documents in smaller panes beside the result, with a list of revisions on the left. Microsoft’s page doesn’t describe this layout, and what you see can depend on your version. If the panes take up too much room, look for Show Source Documents under Review > Compare and choose Hide Source Documents.

If the result opens but shows no marks, the markup view may be set to No Markup or Simple Markup. Switch to All Markup on the Review tab; Word track changes not showing goes through the other display settings that hide changes. Save the result under a new name, for example Report v1 vs v2.docx, so it doesn’t get mixed up with the two versions.

Method 3: Combine revisions from several reviewers

Compare is for two versions of one document. If you sent the same file to several people and each one sent back an edited copy, Microsoft’s blackline page warns against using Compare and points to combining revisions from multiple authors into a single document instead.

  1. On the Review tab, select Review > Compare > Combine.
  2. Under Original document, choose the copy you sent out, or the first reviewer’s copy.
  3. Under Revised document, choose a reviewer’s copy, then select OK.
  4. Save the combined file, then repeat the steps with the combined file as the original and the next reviewer’s copy as the revised document.

Microsoft’s Mac page describes the result of combining the same way as comparing: a new document based on the original, with revision marks for the other copy’s changes. The Windows menu name and the round-by-round approach above aren’t confirmed by the pages cited here, so check the labels on your screen. Combining should keep each reviewer’s name on their edits, so you can see who changed what.

Method 4: Accept or reject the differences

The comparison is a working copy. To turn it into a finished document, go through the tracked changes and keep or drop each one. These are standard Word review commands; Microsoft’s comparison pages don’t list them, so the labels may vary slightly by version:

  1. Press Ctrl+Home to go to the start of the document.
  2. On the Review tab, in the Changes group, select Next to jump to the first change.
  3. Select Accept to keep it or Reject to undo it. Word moves on to the next change.
  4. To settle everything at once, open the arrow under Accept and choose Accept All Changes, or use the same arrow under Reject.
  5. Save the document under its final name.

Accepting or rejecting all changes in one go is quick but hard to check, so do it only when you’ve already read the differences. Press Ctrl+Z right away if you accept something by mistake. Comments aren’t tracked changes and stay in the file until you delete them.

Word for Mac and Word for the web

Word for Mac: Microsoft’s Compare and merge page, which lists Word 2019 for Mac, gives these steps: open one version, select Review > Compare > Compare Documents, pick the original and the revised document, and select OK. To merge, choose Combine Documents from the same menu. For more detail, the page points to Tools > Track Changes > Compare Documents and the more options arrow. Newer Mac versions may place these commands a little differently.

Word for the web: neither page cited here lists Word for the web, and the browser version may not offer Compare. If you can’t find it, select Editing > Open in Desktop App where that’s offered and use Method 1 in the desktop app.

When Compare doesn’t work as expected

Match what you see to the rows below. The causes are possibilities to check, not a diagnosis.

What you seePossible causeWhat to try
A message about tracked changes before comparingOne of the files already has tracked changesSelect Yes, or review those changes first (Method 1)
Compare can’t be selectedA file is protected, read-only or in Protected ViewEnable Editing, or ask the owner for an editable copy
Large parts are marked as changedOriginal and revised files swapped, or formatting changed throughoutSwap the files, or clear Formatting under More (Method 2)
Too many small marksCharacter-level comparisonChoose Word level under More (Method 2)
One of your files now has tracked changesShow changes in was set to the original or revised documentClose without saving, then compare to a new document
The result shows no marksMarkup view set to No Markup or Simple MarkupReview, All Markup

A protected document is one case to check when Compare refuses to run. If a file is restricted to certain kinds of editing, Word may not let you compare it until the restriction is lifted. If it’s your own file, turn the protection off under Review > Restrict Editing with the password; Word document opens as read-only covers Protected View and the other reasons a file won’t accept edits. This behavior isn’t described on the pages cited here.

Layout differences can also produce marks that don’t matter to you, such as a moved page break or new line spacing. If you want to tidy those up before comparing again, see How to remove a page break in Word and How to change line spacing in Word. A watermark or header that changed between versions may be flagged as well; How to remove a watermark in Word explains where to find one.

Sources

How we write our guides: read our editorial policy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *