AirPods not connecting to Windows 11: how to fix it

Quick answer: AirPods pair with Windows 11 like any Bluetooth headset, but only when they are in pairing mode at that moment. Put them in the case, open the lid and hold the setup button on the back for about 5 seconds until the light flashes white (on AirPods 4, 5 and AirPods Pro 3, double-tap the front of the case instead). Then select them under New devices in the Bluetooth menu. If they paired before and now fail, remove them from Settings > Bluetooth & devices and pair again. If they connect but stay silent, pick the AirPods as the output device in the sound menu.

Applies to: AirPods (all generations), AirPods Pro and AirPods Max on Windows 11 PCs with built-in Bluetooth or a USB Bluetooth adapter. If Windows has no Bluetooth switch at all, or no Bluetooth device works, fix the adapter first with our guide to Bluetooth not working in Windows 11; the steps below assume Bluetooth itself is on and working.

Match your symptom

Find the line that matches what you see and start there.

What you seeWhere to lookGo to
AirPods never show up in the device listPairing mode or discovery settingFixes 1 and 2
Shown as paired, but won’t connectOld pairing recordFixes 3 and 5
Connect, then jump back to your iPhoneAutomatic switching on Apple devicesFix 4
Connected, but no soundOutput device in WindowsFix 6
Sound turns flat or muffled in Teams, Zoom or DiscordHeadset (hands-free) modeFix 7
Drop out every few minutesRange, interference or power savingFix 8

Fix 1: Put the AirPods in pairing mode the right way

Windows can only find AirPods while they advertise themselves as a new device. Closing the lid or taking them out of your ears doesn’t do that. Apple’s guide to pairing AirPods with a non-Apple device gives a different method for each model:

ModelHow to enter pairing mode
AirPods 1, 2 or 3, AirPods Pro 1 or 2Keep the AirPods in the case, open the lid, then press and hold the setup button on the back of the case for about 5 seconds until the status light flashes white.
AirPods 4 or 5, AirPods Pro 3Open the case with the AirPods inside, hold it near the PC and double-tap the front of the case until the status light flashes white.
AirPods MaxPress and hold the listening mode button for about 5 seconds until the status light flashes white.

The flashing white light is the signal to look for. As general guidance, if the light shows another color or doesn’t flash, charge the case for a while with both earbuds inside and try again, since a nearly empty case may not stay in pairing mode.

Fix 2: Pair from Windows, not from the case

With the light still flashing white, start the pairing from the PC. Microsoft’s page on pairing a Bluetooth device in Windows describes these steps:

  1. Select the network, sound or battery icon near the clock to open quick settings.
  2. Select the arrow next to the Bluetooth tile (Manage Bluetooth devices). If the tile isn’t highlighted, select it first to turn Bluetooth on.
  3. Under New devices, select your AirPods. If the list only shows Your devices, scroll down until New devices appears.
  4. Follow any prompts and select Done.

You can also go through Start > Settings > Bluetooth & devices and check that the Bluetooth switch is on there. Microsoft notes that if a device doesn’t appear, setting the Bluetooth devices discovery option to Advanced in the same settings page can help, because the default view may hide some devices.

Windows can also show a Swift Pair pop-up for supported devices in pairing mode, with a Connect button. As general guidance, don’t wait for that pop-up with AirPods; pair from the menu instead.

Pairing takes a few seconds, so keep the case open and close to the PC until Windows says the AirPods are connected. Once paired, Microsoft says devices reconnect on their own whenever Bluetooth is on and they’re in range.

Fix 3: Remove the AirPods and pair them again

If Windows lists the AirPods as paired but they won’t connect, the stored pairing may no longer match the AirPods, for example after they were reset or paired with many other devices. Start clean:

  1. Open Settings > Bluetooth & devices and find the AirPods in your device list.
  2. Select the three dots next to them and choose Remove device, then confirm.
  3. Put the AirPods back in the case, close the lid for a few seconds, then repeat Fix 1 and Fix 2.

As general guidance, if the AirPods appear twice in Windows (for example once as AirPods and once as AirPods Hands-Free), remove every entry before you pair again.

Fix 4: Stop your iPhone or Mac from taking them back

As general guidance, AirPods signed in to your Apple ID can move to an iPhone, iPad or Mac on their own when that device starts playing audio, and Windows then shows them as disconnected. If this keeps happening:

  • On the iPhone or iPad, open the Bluetooth settings, tap the info button next to the AirPods and set Connect to This iPhone (or iPad) to the option that connects only when the AirPods were last used with it.
  • On a Mac, do the same from the AirPods entry in the Bluetooth settings.
  • For a quick test, turn off Bluetooth on the phone for a few minutes and see whether the Windows connection stays up.

Menu names on Apple devices may change between iOS and macOS versions, so look for the setting that controls connecting automatically.

Fix 5: Reset the AirPods

Before you reset: a reset removes the AirPods from every device they were paired with, including your iPhone, so you’ll need to set them up there again.

As general guidance, a reset clears the AirPods’ own pairing list and can fix a pair that refuses to connect anywhere. For AirPods with a setup button, put both earbuds in the case, close the lid for about 30 seconds, open it and hold the setup button for about 15 seconds until the light flashes amber and then white. Models without a button and AirPods Max use a different method, so check Apple’s reset instructions for your model. After the reset, remove the old entry from Windows (Fix 3) and pair again.

Fix 6: Connected but no sound

When Windows says the AirPods are connected but sound still comes from the laptop speakers, Windows may not have switched the output. As general guidance:

  1. Select the speaker icon near the clock, then the arrow next to the volume slider, and pick the AirPods entry. If you see two AirPods entries, choose the one without Hands-Free in its name for music and video.
  2. Check that the earbuds are in your ears. AirPods may pause or switch off sound when ear detection thinks they’re out.
  3. Raise the volume in Windows and in the app you’re using; the AirPods volume follows the Windows slider.

If the AirPods don’t appear in the output list at all, follow our guide on headphones not detected in Windows 11. If no output device plays sound, the fault is in Windows audio, which our no sound in Windows 11 guide covers.

Fix 7: Sound turns bad on calls

As general guidance, Bluetooth headsets switch to a hands-free mode when an app opens their microphone, and that mode carries much lower audio quality than music playback. On Windows, this shows up as music sounding flat or muffled the moment you join a Teams, Zoom or Discord call.

  • To keep stereo sound, set the app’s microphone to the laptop’s built-in mic or a USB mic, and leave the AirPods (not the Hands-Free entry) as the speaker.
  • If you need the AirPods microphone, accept the lower quality during calls; it should return to normal after the call ends and the app releases the mic.
  • If the AirPods microphone isn’t picked up at all, check the input device and app permissions in our guide on microphone not working in Windows 11.

Fix 8: AirPods keep disconnecting

As general guidance, drop-outs can come from the AirPods, the PC or the space between them. Work through these checks:

  • Keep the PC within a few meters, with a clear line between you and the laptop. A desktop’s Bluetooth antenna may sit behind a metal case or under a desk.
  • Charge the AirPods and the case. Low battery may make the earbuds disconnect one at a time.
  • Move a USB Bluetooth adapter to a front port or a short USB extension cable, away from USB 3 devices and Wi-Fi routers that can interfere.
  • Check the other device (Fix 4); a phone grabbing the AirPods looks like a random disconnect in Windows.
  • Update the Bluetooth driver from the PC maker or through Windows Update. Our guide on how to update drivers in Windows 11 explains when to update and when to roll back.

Power-saving settings on the Bluetooth adapter can also turn it off during use. Our Bluetooth troubleshooting guide covers those adapter-level steps.

What AirPods can’t do on Windows

Apple describes AirPods on non-Apple devices as a Bluetooth headset for listening and talking, and says Siri isn’t available. As general guidance, other Apple features such as automatic device switching, spatial audio with head tracking, firmware updates and battery status in the Apple style may not work on Windows. If your AirPods need a firmware update, connect them to an iPhone, iPad or Mac for that. Windows may still show a battery level for the AirPods in Settings > Bluetooth & devices.

Official sources

How we write our guides: read our editorial policy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *