Quick answer: on a laptop, the F1 to F12 keys share space with volume, brightness and other controls, and a setting decides which one you get. Press Fn + Esc to toggle Fn Lock (Dell documents that combination for its Precision 5550; other laptops may use a similar toggle on a different key), then try the key again on its own and with Fn held down. If the keys still do the wrong thing, change the function key setting in the BIOS or UEFI setup: Dell calls it Function Key Behavior, and Lenovo calls it Hotkey Mode. If no key combination works at all, reinstall the maker’s hotkey software and the keyboard driver.
In this guide
- Why the top-row keys do two jobs
- Fix 1: Toggle Fn Lock
- Fix 2: Change the function key setting in BIOS or UEFI
- Fix 3: Check your laptop maker’s app
- Fix 4: Reinstall the maker’s hotkey software and drivers
- Fix 5: Reinstall the keyboard driver in Device Manager
- Fix 6: Turn off Filter Keys and Sticky Keys
- Fix 7: External keyboards: check the F Lock key
- Fix 8: Check whether only one app ignores the key
- Quick troubleshooting table
- Related guides
Applies to: Windows 11 laptops and desktop keyboards whose F1 to F12 keys do nothing, do the wrong thing, or only work while Fn is held down. The setting names below come from Dell’s and Lenovo’s own documentation for specific models; HP, ASUS, Acer, Microsoft Surface and other makers use their own names and keys, so treat those steps as a guide and check the manual for your exact model. If letter and number keys don’t type either, the problem is wider than the function row: see keyboard not working in Windows 11 first.
Why the top-row keys do two jobs
Laptop keyboards save space by putting two actions on each top-row key: the standard function (F1 to F12, used by apps for shortcuts such as F2 to rename or F5 to refresh) and a hardware control marked with an icon, such as mute, volume or screen brightness. Only one of the two can be the default. The other needs Fn held down.
Dell’s documentation for its Precision 5550, for example, says F1 to F12 control multimedia by default, so F1 mutes audio and F6 lowers brightness. Lenovo’s documentation describes the same idea from the other side: its Hotkey Mode setting decides whether a shared key sends the hotkey or the function key when pressed alone. So when a key seems broken, it may be working as designed but set to the action you didn’t expect. Press it once alone and once with Fn held down before changing anything else.
Fix 1: Toggle Fn Lock
Fn Lock flips the default for the whole top row, so you don’t have to hold Fn every time. It’s also easy to switch on by accident, which can make the keys seem to change behavior overnight.
- Press Fn + Esc once. On the Dell Precision 5550, Dell lists Fn + Esc as the toggle for the Fn-key lock, and says to press it to use F1 to F12 as standard function keys in software that needs them.
- Test the key that wasn’t working, alone and with Fn held down.
- If nothing changed, look for a small padlock icon or the letters Fn Lock on Esc or another key. On laptops from other makers, the lock may sit on a different key, and some laptops have a light on the key that shows whether the lock is on.
If your laptop has no lock key at all, the default may only be changeable in the BIOS or in the maker’s app (Fix 2 and Fix 3).
Fix 2: Change the function key setting in BIOS or UEFI
When Fn Lock doesn’t stick, or your laptop has no lock key, the default is set in the firmware. Changing it here makes the choice permanent until you change it back.
Before you start: change only the keyboard option. Other BIOS settings, such as boot or security options, can stop Windows from starting if they’re changed by mistake. If you’re unsure what you changed, choose the option to exit without saving.
- Open the setup screen: restart the PC and press the setup key as it starts. The key differs by maker (F2, F1, F10, Del or a dedicated button are all used), so check your model’s manual. From Windows 11 you can also go to Settings > System > Recovery, select Restart now next to Advanced startup, then choose Troubleshoot, Advanced options and UEFI Firmware Settings, if your PC offers that option.
- Dell: Dell’s documentation says the default behavior of F1 to F12 can be changed with the Function Key Behavior setting in the BIOS setup program. Pick the function key option if you want F1 to F12 without Fn, or the multimedia option if you want the icons.
- Lenovo: Lenovo’s documentation describes a Hotkey Mode setting in the UEFI/BIOS. With Hotkey Mode Disabled, a shared key sends F1 to F12 when pressed alone, and you hold Fn for the hotkey. With it Enabled, the key sends the hotkey alone, and you hold Fn for F1 to F12. Lenovo notes that hotkeys which don’t share a key with F1 to F12 always need Fn and aren’t affected.
- HP and others: the setting exists on some other brands under a different name; on HP laptops it’s reportedly called Action Keys Mode, but neither the name nor its menu location is confirmed here, so check your model’s manual or the maker’s support site.
- Save the change, exit, and test the keys once Windows has started.
Fix 3: Check your laptop maker’s app
Some laptops also expose the function key setting in the maker’s Windows app, so you don’t need to open the BIOS. Lenovo Vantage, Dell’s and HP’s support or control apps, and the tools from ASUS, Acer and MSI may include a keyboard or input section; whether a function key or Fn Lock option is there depends on the model and the app version, so it may not appear on yours.
If the app has such a setting and it disagrees with the BIOS, the last one applied may win, which can make the keys seem to switch back after a restart. Set the same choice in both places, or use only one of them.
Fix 4: Reinstall the maker’s hotkey software and drivers
The hardware controls on the top row (volume, brightness, airplane mode, display switching) can depend on software from the laptop maker rather than on Windows alone. That software isn’t always part of a clean Windows install, so if the icon keys stopped working after you reset or reinstalled Windows, a missing maker driver is a good place to look.
- Open your laptop maker’s support site and find the downloads page for your exact model, using the serial number or service tag if the site asks for one. The maker’s support app can also do this.
- Look for packages with names such as hotkey, keyboard, function key, system interface, ATK or control center, and for chipset and BIOS updates. Package names vary by maker, so read the descriptions.
- Install them, restart the PC and test the keys again.
Get drivers from the maker’s site or Windows Update rather than from driver download sites. For the wider picture, see how to update drivers in Windows 11. Before a BIOS update: connect the charger and don’t turn off the laptop until it finishes, because an interrupted BIOS update can leave the PC unable to start.
Fix 5: Reinstall the keyboard driver in Device Manager
If no key on the top row responds, even with Fn, the keyboard driver itself may be at fault. Reinstalling it is low risk, because Windows should set it up again when the PC restarts.
- Right-click Start and select Device Manager.
- Expand Keyboards. On a laptop you’ll see an entry such as Standard PS/2 Keyboard or an HID keyboard device; an external keyboard may appear as HID Keyboard Device.
- Right-click the keyboard and select Uninstall device, then confirm.
- Restart the PC. Windows should reinstall the driver as it starts.
- If there are devices with a warning icon under Human Interface Devices or System devices, they can be linked to hotkeys too. Update or reinstall them, or install the maker’s package from Fix 4.
Keep a mouse or touchpad available while you do this; the keyboard may stop typing until the restart. If the whole keyboard still fails, keyboard not working in Windows 11 covers the driver and hardware checks in more depth.
Fix 6: Turn off Filter Keys and Sticky Keys
Filter Keys tells Windows to ignore short or repeated key presses, which can make a quick tap on an F-key seem to do nothing. Sticky Keys lets modifier keys such as Ctrl and Alt stay pressed after you let go, which can change what a shortcut does. Both are accessibility features, and both can be switched on by holding or tapping keys, so it’s worth checking that they’re off if you don’t use them.
- Open Settings > Accessibility > Keyboard.
- Turn off Filter keys and Sticky keys if you don’t need them.
- Test the function keys again.
If you rely on either feature, leave it on and adjust its options on the same page instead.
Fix 7: External keyboards: check the F Lock key
Some external keyboards have an F Lock key that switches the top row between F1 to F12 and extra commands such as Undo, Reply or Save. If the keys on an external keyboard behave oddly, press F Lock once and test again. Other keyboards use an Fn key and a lock combination like a laptop; the label and the combination vary by brand, so the keyboard’s manual has the final word.
Keyboards that come with their own software (for gaming or multi-device use) may also let you reassign the top row. If the keys were remapped there, reset that profile to its default, or test the keyboard on another PC to see whether the setting travels with it.
Fix 8: Check whether only one app ignores the key
If the function keys work in one program but not in another, Windows and the keyboard are fine and the issue sits in that program. A shortcut can be reassigned in the app’s own settings, or another running app (a screen recorder, a game overlay or a remapping tool) can catch the key first.
- Try the same key in another app, such as F5 to refresh a browser page. If it works there, focus on the app that ignores it.
- Look for a keyboard shortcuts section in that app’s settings and check whether the key was changed or turned off.
- Close background apps that use global hotkeys, one at a time, and test again.
- For the Print Screen key, which other apps can compete for, see Print Screen not working on Windows 11.
Quick troubleshooting table
| What you see | Possible cause | What to try |
|---|---|---|
| F1 to F12 change volume or brightness instead of working in apps | The top row defaults to hardware controls | Hold Fn, toggle Fn Lock (Fix 1) or change the BIOS setting (Fix 2) |
| The keys only work while Fn is held down | Fn Lock or the BIOS setting is in the other state | Fix 1, Fix 2 |
| The setting switches back after a restart | The maker’s app and the BIOS disagree | Fix 3 |
| Volume and brightness keys stopped after a Windows reinstall | The maker’s hotkey software or driver is missing | Fix 4 |
| No top-row key responds at all, even with Fn | A keyboard or HID driver problem | Fix 5 |
| Quick taps are ignored but held keys work | Filter Keys is on | Fix 6 |
| An external keyboard’s top row runs Undo, Save or other commands | F Lock is off, or the keys were remapped | Fix 7 |
| A key works everywhere except in one app | The app’s shortcut was changed or another app catches the key | Fix 8 |
If none of this helps and only one key fails on every setting and in every app, the key itself may be worn or damaged, for example after a spill. A repair shop or the maker’s support team can check it, and the keyboard may still be under warranty.
Related guides
- Keyboard not working in Windows 11: how to fix it
- Print Screen not working: how to fix it on Windows 11
- Laptop keyboard backlight not working: how to fix it
- Brightness not working in Windows 11: how to fix it
- How to update drivers in Windows 11 (and when not to)
Leave a Reply