Quick answer: Unlock the iPhone, connect it with a cable that carries data, and tap Trust when the iPhone asks whether to trust this computer. If no prompt appears, plug straight into a port on the PC, try another cable, and update the Apple Devices app (or iTunes), Windows and iOS. If the iPhone charges but still doesn’t show up, restart the Apple Mobile Device Service or reinstall the iPhone’s driver in Device Manager, then check whether security software is getting in the way.
In this guide
- Match what you see
- Fix 1: Unlock the iPhone and tap Trust
- Fix 2: Check the cable and the USB port
- Fix 3: Update the app, Windows and iOS
- Fix 4: Restart the Apple Mobile Device Service
- Fix 5: Reinstall the iPhone driver
- Fix 6: Rule out security software and VPNs
- Fix 7: Reinstall the Apple Devices app or iTunes
- Fix 8: Narrow it down to the PC or the iPhone
- Related guides
Applies to: Windows 11 (and Windows 10) with the Apple Devices app or iTunes, and an iPhone or iPad connected over USB. On Windows 11, Apple’s newer Apple Devices app, from the Microsoft Store, handles backups, updates and syncing that iTunes used to do; the steps below work for both. If Windows itself shows a USB device not recognized message, start with our guide to USB devices not recognized in Windows 11.
Match what you see
The way the problem shows up narrows down where to look:
| What you notice | Possible cause | Go to |
|---|---|---|
| iPhone charges but never shows a Trust prompt | Phone locked, or a charge-only cable | Fixes 1 and 2 |
| You tapped Don’t Trust by mistake | PC is blocked from the phone | Fix 1 |
| Nothing happens at all, not even charging | Cable, port or hub | Fix 2 |
| Message that the Apple Mobile Device Service is not started | Service stopped or set to manual | Fix 4 |
| Device Manager shows the iPhone with a warning sign | Damaged or missing driver | Fix 5 |
| Worked before, stopped after a security suite or VPN install | Software blocking the connection | Fix 6 |
| App shows errors or won’t open the device page | Outdated or broken install | Fixes 3 and 7 |
Fix 1: Unlock the iPhone and tap Trust
An iPhone doesn’t share its content with a computer it hasn’t trusted. The first time you connect it to a PC, the phone shows a Trust this Computer? alert, and it only appears while the phone is unlocked. As general guidance, if you tap Don’t Trust, or the screen was locked, the PC may see only a charger.
- Open the Apple Devices app (or iTunes) on the PC.
- Unlock the iPhone and stay on the Home Screen.
- Connect the cable. When the prompt appears, tap Trust and enter the iPhone passcode.
- On the PC, the app may also ask you to confirm. Approve it, and the iPhone should appear in the app’s sidebar.
This matches Apple’s guide for when a computer doesn’t recognize an iPhone or iPad, which for Windows says to open the Apple Devices app, connect the device with a USB cable and tap Trust when the alert appears; the device then appears in the sidebar of the Apple Devices app.
If you tapped Don’t Trust earlier, or the alert never appears, Apple says to reset location and privacy settings. On the iPhone, go to Settings > General > Transfer or Reset iPhone > Reset > Reset Location & Privacy. The next time you connect, the prompt appears again.
Note: Reset Location & Privacy also resets the location and privacy permissions you gave apps on the iPhone, so apps will ask for access again. It doesn’t erase your data. Recent iOS versions may also ask for the passcode again when the PC starts a backup.
Fix 2: Check the cable and the USB port
Some cables, especially cheap ones bundled with chargers or power banks, carry power but no data. The iPhone charges, so the cable looks fine, yet Windows never sees a device. Apple says the cable must support both data and charging, and suggests trying another USB cable, another USB port or another computer. As general guidance:
- Use the cable that came with the iPhone, or another cable you know transfers data.
- Plug straight into a USB port on the PC, not a hub, monitor, dock or keyboard port. On a desktop, the ports on the back connect directly to the motherboard.
- Try a different port, and if you have a USB-C cable and a USB-C port, try that pairing as well.
- If the iPhone doesn’t chime or vibrate when you connect it, Apple suggests unplugging the cable and checking the charging port for debris. Look into the port with a light. Lint packed into it can stop the plug from seating fully; as general guidance, clean it gently with a wooden toothpick, never metal.
If no USB device works in that port, the problem is the PC’s port or controller rather than the iPhone. Our guide to fixing USB devices that aren’t recognized covers power management and USB controller drivers.
Fix 3: Update the app, Windows and iOS
An old app may not recognize a phone on a newer iOS version, and the reverse can also happen. Apple’s checklist includes the latest version of Windows and of iOS or iPadOS. Update all three pieces:
- Apple Devices app or iTunes: open the Microsoft Store, select Library (or Downloads) and choose Get updates. If you installed iTunes from Apple’s website, use Help in iTunes to check for a newer version, or the Apple Software Update tool if it is installed. If the Store won’t download anything, see Microsoft Store not downloading apps.
- Windows: open Settings > Windows Update, select Check for updates and install what is offered, including optional updates if a device driver for the phone is listed there.
- iPhone: open Settings > General > Software Update and install any update.
Restart both the PC and the iPhone after updating, then connect again.
Fix 4: Restart the Apple Mobile Device Service
As general guidance, the Apple Mobile Device Service (AMDS) runs in the background and lets Apple’s software talk to a connected iPhone. If it stopped or is set not to start, the app may report that the iPhone can’t be used because the service isn’t started. To restart it:
- Close the Apple Devices app or iTunes and unplug the iPhone.
- Press Windows + R, type
services.mscand press Enter. - Find Apple Mobile Device Service, right-click it and choose Properties.
- Set Startup type to Automatic.
- Select Stop, wait until the status shows it has stopped, then select Start.
- Select OK, restart the PC, open the app and connect the iPhone.
If the service isn’t in the list, you may have the Microsoft Store version, which can run its helper differently. In that case, check Settings > Apps > Startup and make sure any Apple or iTunes helper entry, such as iTunes Mobile Device Helper, is turned on. If the service won’t stay running, security software may be stopping it; see Fix 6.
Fix 5: Reinstall the iPhone driver
Windows uses a driver to talk to the iPhone over USB. If that driver is damaged or wasn’t installed, the phone may appear in Device Manager with a yellow warning sign, under an unexpected name, or not at all. As general guidance, with the iPhone unlocked and connected:
- Right-click Start and choose Device Manager.
- Expand Portable Devices and look for Apple iPhone. Also check Universal Serial Bus controllers or Universal Serial Bus devices for an entry such as Apple Mobile Device USB Driver or Apple Mobile Device USB Composite Device.
- Right-click the iPhone entry and choose Update driver, then Search automatically for drivers.
- If that changes nothing, right-click it, choose Uninstall device, unplug the iPhone, restart the PC and connect it again so Windows reinstalls the driver.
With iTunes from Apple’s website, the driver files may sit in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. In that case, you can choose Update driver, then Browse my computer for drivers, and point Windows to that folder. If the folder doesn’t exist, reinstalling the app (Fix 7) puts the driver back. Our guide on how to update drivers in Windows 11 explains each Device Manager option.
Fix 6: Rule out security software and VPNs
Third-party antivirus, firewall and VPN software may block the Apple Mobile Device Service or the local connection between the app and the phone. If the problem started after you installed or updated such software:
- Disconnect from the VPN and close the VPN app completely.
- Update the security software, since newer versions may fix the conflict.
- As a short test, turn off the third-party security suite’s real-time protection or firewall, connect the iPhone and see whether it appears. Turn protection back on right after the test.
- If the phone shows up only with the software off, add the Apple Devices app or iTunes and Apple’s background services to the software’s allowed list, or ask its maker how to do that.
Warning: Don’t leave protection off. If you can’t find a safe exception setting, contact the security software’s support instead of keeping it disabled.
Fix 7: Reinstall the Apple Devices app or iTunes
A damaged install can leave the driver or service missing. Reinstalling replaces them. Before you start, note that, as general guidance, iPhone backups made on the PC are stored separately from the app, so removing the app doesn’t normally remove them; if a backup matters to you, copy the backup folder somewhere safe first.
- Open Settings > Apps > Installed apps.
- Uninstall the Apple Devices app and iTunes, if both are present. If you installed iTunes from Apple’s website, also remove the supporting Apple components listed there, such as Apple Mobile Device Support, Apple Software Update, Bonjour and Apple Application Support.
- Restart the PC.
- Install the Apple Devices app from the Microsoft Store (or iTunes, if you still need it for music or media).
- Open the app, unlock the iPhone and connect it.
As general guidance, the Microsoft Store version is the simplest to keep up to date, because the Store updates it along with your other apps.
Fix 8: Narrow it down to the PC or the iPhone
If nothing above helps, test each half separately:
- Another computer: connect the iPhone to a different PC or a Mac with the same cable. If it works there, the problem is on your PC.
- Another phone: connect a different iPhone or iPad to your PC. If that one works, the problem points to your iPhone or its port.
- File Explorer test: with the iPhone trusted, it may show up under This PC as Apple iPhone, with a folder for photos. If it appears there but not in the app, the connection works and the app install is the issue (Fix 7).
When the iPhone isn’t recognized on any computer, even with a known good cable, the phone’s port may need service. Apple notes that in this case you might need to contact Apple Support for service.
If you use other Apple gear with your PC, our guide to AirPods not connecting to Windows 11 covers Bluetooth pairing issues.
Related guides
- USB Device Not Recognized in Windows 11: How to Fix It
- How to update drivers in Windows 11 (and when not to)
- Microsoft Store not downloading or installing apps in Windows 11: how to fix it
- AirPods not connecting to Windows 11: how to fix it
Leave a Reply