How to delete a blank page in Word (including the last page)

Quick answer: show Word’s paragraph marks (Microsoft’s page gives Ctrl + Shift + 8 for this), then look at what’s sitting on the blank page. Extra empty paragraphs and manual page breaks can simply be selected and deleted. A blank page at the very end is a different case: Microsoft explains that Word keeps a final paragraph that can’t be deleted, so the fix is to shrink that paragraph to a 1-point font size so it fits on the page before. If a section break makes the blank page, Microsoft suggests changing it to a Continuous break instead of deleting it.

Applies to: Word for Microsoft 365 and Word 2024 on Windows. Microsoft’s pages also list the Mac versions, and where they give a Mac shortcut it’s noted below. Microsoft has a separate page for deleting a blank page in Word for the web, since the browser version may not offer every option described here.

Step 1: Show the hidden formatting marks

A page that looks empty may still hold something invisible that keeps it open, and Word can show you what it is. Microsoft’s page Remove a blank page or section break in Word uses Ctrl + Shift + 8 to show paragraph marks (⌘ + 8 on a Mac). Microsoft says pressing the same keys again hides them. If the shortcut doesn’t respond, the ¶ button described below may do the same.

With the marks on, each paragraph should end in a ¶ symbol, and page and section breaks may show up as labeled dotted lines. The ¶ button in the Paragraph group on the Home tab may do the same thing if you’d rather click than use the keyboard. Our Word tips and tricks guide lists this shortcut with other ways to see what’s really in a document.

What is on the blank page?

Once the marks are visible, this table may help you match what you see to the right method. It’s our own summary of the Microsoft pages cited below, not a list Microsoft publishes.

What you see on the blank pagePossible causeGo to
Several ¶ marks and nothing elseExtra empty paragraphsDelete empty paragraphs
A single ¶ on the last pageWord’s final paragraph pushed onto a new pageDelete a blank last page
A single ¶ right after a table that ends the documentThe final paragraph that follows the tableBlank page after a table
A dotted line that may read Page BreakA manual page breakRemove a manual page break
A dotted line that may read Section Break (Next Page, Odd Page or Even Page)A section break that starts a new pageDeal with a section break
A small square next to an empty ¶Page break before is turned on for that paragraphTurn off Page break before

Delete empty paragraphs

The simplest case is a run of empty paragraphs, which may come from pressing Enter several times to reach a new page. Microsoft’s Delete a page in Word says that for a page with text, graphics or empty paragraphs, you select the content and press Delete.

  1. Turn on the formatting marks (Step 1).
  2. One way to select them: click just before the first empty ¶ on the blank page and drag to the last one, or hold Shift and click the last one.
  3. Press Delete. The page may close up.

If you need text to start on a new page, a manual page break may be a tidier choice than a stack of empty paragraphs, because the text after it may stay put when you edit earlier pages.

Delete a whole page by page number

When a page holds content you want gone, or you can’t easily select everything on it, Microsoft’s Delete a page article gives a way to select the whole page at once on Windows:

  1. Click or tap anywhere on the page you want to delete.
  2. Press Ctrl + G. Microsoft’s page says this opens the Find and Replace window.
  3. In the box Microsoft calls Enter page number, type \page and press Enter. According to Microsoft, this selects the content of that page.
  4. Select Close (or close the window).
  5. Check that everything on the page is selected, then press Delete.

Before you delete: check the selection carefully, because it may include the end of a table or a section break that controls the layout of the pages around it. If something moves that shouldn’t, Undo (Ctrl + Z in Word for Windows) may reverse it. This method may not help with a blank last page, which is covered next.

Delete a blank last page

This is the case that resists the Delete key. Microsoft explains that Word has an end paragraph that can’t be deleted, and a blank final page appears when that paragraph gets pushed onto a new page. Since you can’t remove it, the fix is to make it small enough to fit on the page before. Microsoft’s steps:

  1. Press Ctrl + Shift + 8 (⌘ + 8 on a Mac) to show paragraph marks.
  2. Select the paragraph mark on the blank page.
  3. Click in the box Microsoft calls Font size, type 01 and press Enter. Microsoft says the paragraph should now fit on the previous page.
  4. Press the same shortcut again to hide the paragraph marks.

If the page is still there, Microsoft suggests making room by reducing the bottom margin. Its page points to Layout > Margins > Custom Margins, where you can lower the bottom margin (Microsoft’s example is 0.3 inches); the labels may differ slightly in your version. Keep in mind that a smaller margin changes every page in that section, and a margin that small may be close to the edge your printer can print, so check the result in print preview.

Blank page after a table at the end

If your document ends with a table, such as a résumé laid out in a table, the blank page may come from the same final paragraph. Word appears to always keep a paragraph mark after a table, and when the table fills the page to the bottom, that one ¶ may have nowhere to go but a new page.

The Microsoft pages we read don’t describe the table case separately, but the fix for a blank last page may work here too, since it’s the same paragraph:

  • Show the formatting marks and click the ¶ just below the table.
  • Set its font size to 1 point, as in the steps above.
  • If the page remains, reduce the bottom margin slightly, or make the table a little shorter, for example by removing an empty row at the bottom.

Don’t try to delete the table’s last row to get rid of the page unless that row is really empty, since it may hold content you need.

Remove a manual page break

Microsoft notes that a manual page break can create an unwanted blank page. This may happen when a break sits at the end of a page that’s already full, or right before another break. To remove it:

  1. Turn on the formatting marks with Ctrl + Shift + 8.
  2. Select the dotted line that may read Page Break. Clicking just to its left or double-clicking it may select it.
  3. Press Delete.

Without the break, the text after it may run on directly from the text before, so if you still want the next part to start on a new page, leave one break in place and delete only the extra one.

Deal with a section break

Section breaks may be harder to spot than page breaks, and they may carry settings such as headers, footers, page numbering and orientation. Microsoft’s tip is to switch to Draft on the View tab, where section breaks may be easier to find.

Section break in the middle of the document

Microsoft warns that deleting a section break in the middle of a document can cause formatting problems, since the sections on either side may have different layouts. Instead, it suggests changing the break to a Continuous section break, which doesn’t start a new page. Microsoft’s page describes doing this from the Breaks options on the Layout tab, but the exact steps may differ in your version of Word, and choosing a break from that menu may add a new break rather than change the existing one. With the formatting marks on, check that only one break remains and that it now reads Continuous.

If the sections have different headers, footers or page numbers, they may still need attention after the change; our guides to a header on the first page only and Word page numbers that are wrong cover how those settings belong to sections.

Next Page, Odd Page and Even Page breaks

Microsoft lists Next Page, Odd Page and Even Page section breaks as sources of blank pages. An Odd Page break, for example, may start the next section on the next odd-numbered page, so Word may add an empty even page in between. If the blank page is at the end of the document and a section break sits there, Microsoft says to place the cursor directly before the break and press Delete.

Turn off Page break before

Sometimes there’s no break to delete, yet a paragraph still jumps to a new page. Microsoft’s tip is that a small square bullet beside the paragraph mark suggests the Page break before option is turned on for that paragraph. To turn it off:

  1. Right-click the paragraph and choose the paragraph settings option (Microsoft’s page calls it Paragraph Settings; your menu may just say Paragraph).
  2. Open the tab Microsoft’s page names Lines and Page Breaks (the exact label may differ slightly in your version).
  3. Clear Page break before and close the dialog.

This option may be part of a heading style, in which case every paragraph in that style may start on a new page. If the square appears on all your headings, the setting may be in the style rather than in one paragraph.

If the blank page appears only when printing

If Word shows no blank page on screen but one comes out of the printer or appears in print preview, the cause may be elsewhere. Different views, printer margins and printing options may change how pages break; see print preview different from the document in Word. If blank sheets come out from every app, not only Word, the printer itself may be the cause, which our guide to a printer printing blank pages covers.

Sources

How we write our guides: read our editorial policy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *