Quick answer: first confirm that your account supports the feature. Microsoft says automatic replies are not supported for Gmail, Yahoo, or other POP or IMAP accounts, and that a missing Automatic Replies button in classic Outlook may point to one of those accounts. For a work, school or Outlook.com account, open the automatic replies settings, check that they are turned on, that the time period is correct and, for outside senders, that Send replies outside your organization is selected. For POP and IMAP accounts, use a rule with a reply template and keep Outlook running.
In this guide
- Match your symptom
- Fix 1: Check your account type
- Fix 2: Set up automatic replies again in classic Outlook
- Fix 3: Check the settings in new Outlook and Outlook on the web
- Fix 4: Replies don’t reach people outside your organization
- Fix 5: Use a rule for Gmail, Yahoo, POP and IMAP accounts
- Fix 6: Replies don’t turn off, or a sender gets only one reply
- Still not working? Other checks
- Related guides
Applies to: classic Outlook for Windows (Microsoft 365, Outlook 2024 and Outlook 2021), new Outlook for Windows, Outlook on the web and Outlook.com. Outlook for Mac and the mobile apps may have their own steps; see Microsoft’s automatic replies article.
Match your symptom
As general guidance, classic Outlook has a File tab, while new Outlook may show a Settings gear instead. The table below is a map of this guide, not a list from Microsoft.
| What you see | Possible cause | Go to |
|---|---|---|
| No Automatic Replies button under File in classic Outlook | Gmail, Yahoo, POP or IMAP account | Fix 1 and Fix 5 |
| Replies were set but nobody gets them | Replies off, or the time period has passed | Fix 2 and Fix 3 |
| Colleagues get the reply, outside senders don’t | Outside replies not selected, or limited to contacts | Fix 4 |
| Rule-based reply stops while you’re away | Outlook closed or the PC asleep | Fix 5 |
| Reply keeps going after you’re back | No end time set | Fix 6 |
| A sender got the reply once and never again | Reply is sent once per sender | Fix 6 |
Fix 1: Check your account type
As general guidance, automatic replies may depend on the mail server and not only on the Outlook app. Microsoft’s article Send automatic out of office replies from Outlook explains that if you don’t see the option, you may be using a Gmail, Yahoo, or other POP or IMAP account, which doesn’t support the feature. In that case, Microsoft suggests creating a rule that replies to incoming messages instead, covered in Fix 5.
As general guidance, a Microsoft 365 work or school account, an Exchange account and an Outlook.com account should all show automatic replies. If you have several accounts in the same Outlook window, make sure the account you’re setting up is the one selected, since the option may appear for one mailbox and not for another.
Fix 2: Set up automatic replies again in classic Outlook
As general guidance, going through the setup again may catch a toggle or a date that is set wrong. Based on Microsoft’s steps for classic Outlook:
- Select File > Automatic Replies.
- In the Automatic Replies box, select Send automatic replies.
- If you want the replies to stop on their own, set a start and end time. Microsoft notes that the end time turns them off; without one, you have to turn them off yourself.
- Type your message on the Inside My Organization tab and, for work or school accounts, on the Outside My Organization tab as well.
- Select OK.
Microsoft says that while replies are on, a message appears under the ribbon with a Turn off button. If you don’t see that bar after selecting OK, as general guidance the setting may not have been saved to the server, so check your connection and try again.
It may also help to check the start date as well as the end date. A reply scheduled to start tomorrow may look correct in the dialog but won’t send anything today, and an end date in the past may mean the replies have already stopped.
Fix 3: Check the settings in new Outlook and Outlook on the web
In new Outlook, you may find the option under Settings > Accounts > Automatic replies; the exact path may vary by version. Turn on the Automatic replies toggle, set Send replies only during a time period if you want a start and end time, and select Save. As general guidance, if you open settings and close them without selecting Save, the change may not be kept.
In Outlook on the web and Outlook.com, Microsoft’s automatic replies page for the web gives the path Settings > Mail > Automatic replies. The steps are:
- Select the Turn on automatic replies toggle.
- Optionally select Send replies only during a time period and enter a start and end time.
- Pick any calendar options you want, such as Block my calendar for this period.
- Type the message in the box at the bottom of the window.
- Select Save at the top of the window.
Microsoft notes that without a time period, the reply stays on until you turn it off. As general guidance, settings made on the web for a Microsoft 365 or Outlook.com account may also show up in classic and new Outlook, which makes the web a useful place to confirm what the server actually has saved.
Fix 4: Replies don’t reach people outside your organization
For work and school accounts, replies to outside senders are a separate setting. In new Outlook and on the web, Microsoft describes a Send replies outside your organization check box; as general guidance, if it is cleared, only colleagues may get your message. In classic Outlook, the Outside My Organization tab has its own message and settings.
Microsoft also describes a Send replies only to contacts option in new Outlook, which limits outside replies to people in your Contacts list. In classic Outlook, Microsoft recommends My contacts only to avoid replying to all outside email. As general guidance, if an outside sender isn’t in your contacts, either of these choices may explain why they got nothing.
Microsoft warns that replying to everyone outside your organization sends replies to every incoming email, including newsletters, advertisements and possibly junk mail. As general guidance, your organization may also block automatic replies to outside addresses at the server level; if all the settings look right and outside senders still get nothing, ask your IT administrator.
Fix 5: Use a rule for Gmail, Yahoo, POP and IMAP accounts
Microsoft’s article Use rules to create an out of office message in classic Outlook for Windows describes a workaround for accounts without the built-in feature. It needs two parts: a saved message template and a rule that replies with it.
Create the template
- Create a new email message and type a subject and the text of your reply.
- Select File > Save As.
- Name the file and, in the Save as type list, choose Outlook Template (*.oft).
- Keep the default location or choose another, then select Save.
Create the rule
- On the File tab, select Manage Rules & Alerts, then New Rule on the E-mail Rules tab.
- Under Start from a blank rule, select Apply rule on messages I receive and select Next.
- To reply to every message, leave the conditions unchanged, select Next and confirm with Yes.
- Select the action reply using a specific template, then select the underlined a specific template link.
- In the Look In box, choose User Templates in File System, pick your template and select Open.
- Add exceptions if you need them, name the rule (for example, Out of Office) and select Finish.
The most important limit: Microsoft says you must leave Outlook running for the rule to reply. As general guidance, this also means the PC shouldn’t go to sleep, sign you out or install updates and restart while you’re away; Windows power settings may need a change for the time you’re gone.
A rule of this kind may reply to each sender only once while Outlook stays open, and restarting Outlook may let the same people get the reply again. Microsoft’s rules page does not describe this, so treat it as something to watch for rather than a fixed behavior. If the rule shows an error or won’t save, see our guide to “There was an error reading the rules from the server”.
As general guidance, Gmail and Yahoo Mail also offer their own vacation responders on their websites. Those may run on the provider’s server, so they may be a more reliable choice than an Outlook rule when you can’t leave your PC on.
Fix 6: Replies don’t turn off, or a sender gets only one reply
If the reply carries on after you’re back, as general guidance this may mean no end time was set. Turn it off with the Turn off button under the ribbon in classic Outlook, as Microsoft describes, or with the Automatic replies toggle in new Outlook and on the web. For a rule-based reply, open File > Manage Rules & Alerts and clear the check box next to the rule.
If a colleague says they emailed twice and got the reply only the first time, that may be by design. Microsoft states that the web version’s out of office message is sent only once to each person who emails you while you’re away. As general guidance, turning replies off and on again may reset that list, which can help when you have changed the text and want people to see the new version.
Still not working? Other checks
- The sender’s junk folder: as general guidance, automatic replies may be filtered as junk on the other side. Ask the sender to look there before you change more settings.
- Mail isn’t arriving at all: as general guidance, a reply can only go out for mail that reaches your mailbox. If incoming mail is stuck too, see Outlook not receiving emails.
- A shared or second mailbox: as general guidance, automatic replies are set per mailbox, so a shared mailbox may need its own settings, which may require permission from your administrator. Our guide to adding a shared mailbox in Outlook shows how to open one.
- Missing File menu options: as general guidance, if you moved to new Outlook and want the classic Outlook dialog back, see how to get classic Outlook back.
- Settings won’t save in classic Outlook: as general guidance, a damaged profile may stop changes reaching the server. Try the web settings first; if they work there, a new profile may help, as explained in how to reset Outlook to default settings.
Related guides
- “There was an error reading the rules from the server” in Outlook: how to fix it
- Outlook not receiving emails: how to fix it
- How to Add a Shared Mailbox in Outlook (Windows, Mac, Web and Mobile)
- Classic Outlook download: how to get it back on Windows 11 and 10
- How to reset Outlook to default settings (classic and new Outlook)
Leave a Reply