Windows 11 stuck on the Welcome screen: how to fix it

Quick answer: If Windows 11 shows Welcome and spinning dots after you sign in, wait up to about ten minutes first, because the first sign-in after an update can be slow. If nothing changes, unplug USB devices, disconnect the network cable or turn off the router’s Wi-Fi, and force a restart. If the PC still hangs, open the Windows Recovery Environment, run Startup Repair, uninstall the latest update or start in Safe Mode to undo the last driver or app change. System Restore and Reset this PC come last.

Applies to: Windows 11 (most steps also work in Windows 10) on desktops and laptops where the PC starts, you can enter your PIN or password, and then the screen stays on Welcome with the loading dots. If the screen goes black instead, see how to fix a black screen in Windows; if the PC never reaches the sign-in screen and shows Automatic Repair, see the Automatic Repair guide.

Match what you see to a cause

After you sign in, Windows loads your user profile, starts services and drivers, runs startup apps and, on a network, may contact servers. A hang at any of those points looks the same: the Welcome screen just keeps spinning. The details around it help you pick where to start.

What you seePossible causeGo to
Stuck right after Windows installed updatesUpdate still finishing, or a faulty updateFixes 1 and 6
Stuck only with a USB drive, dock or printer plugged inA device or its driver holding up sign-inFix 2
Work PC, or mapped network drivesWaiting on a server or network shareFix 2
Started after you installed an app or driverStartup app, service or driverFix 7
Stuck every time, even after restartsDamaged system files or a broken updateFixes 5, 6 and 8
Goes on to a black screen instead of the desktopDisplay driver or Explorer not startingFix 7 and the black screen guide
Nothing else helpsDeeper system damageFixes 9 and 10

Fix 1: Give it a few minutes

Right after a feature update or a large cumulative update, Windows may still be finishing setup work for your account during the first sign-in, and that can take far longer than usual. As general guidance, leave the PC alone for around ten minutes before you treat it as stuck. On a laptop, plug in the charger so it doesn’t run out of battery halfway.

As general guidance, if the drive activity light keeps flickering, Windows may still be working. If the light stays dark and nothing changes for a long time, move on.

Fix 2: Unplug devices and disconnect the network

A USB drive, card reader, docking station, game controller or printer can hold up sign-in if Windows waits on its driver. A network share or a server that doesn’t answer can do the same on PCs that map network drives at sign-in.

  1. Unplug everything except the keyboard, mouse and the main monitor.
  2. Unplug the network cable, or turn off Wi-Fi on the router for a moment.
  3. Wait a minute or two to see whether the desktop appears.
  4. If it does, reconnect devices one at a time to find the one that causes the hang.

On a work or school PC, sign-in can depend on your organization’s servers and policies. If the hang only happens on the company network, contact your IT team before you change anything else.

Fix 3: Force a restart

If the Welcome screen still doesn’t move, try Ctrl + Alt + Delete first. If a screen with options appears, select the power icon (usually in the lower-right corner) and choose Restart.

If the keyboard does nothing, press and hold the power button until the PC turns off, wait a few seconds and turn it on again.

Warning: don’t cut the power while the screen says Windows is installing or configuring updates; wait for that to finish first. A forced shutdown can lose unsaved work in any app that was running.

Fix 4: Open the Windows Recovery Environment

When Windows doesn’t get past sign-in, most of the repair tools live in the Windows Recovery Environment (Windows RE). Microsoft’s Windows Recovery Environment page lists several ways in. The ones that work on a PC that hangs at Welcome:

  • Shift and Restart: Microsoft says to hold the Shift key while you select Power > Restart. On the sign-in screen, the power icon usually sits in the lower-right corner.
  • Failed starts: according to Microsoft, if Windows fails to start correctly multiple times, it enters Windows RE on its own. Its steps: turn the PC on, wait for the Windows or manufacturer logo, then hold the power button until it shuts down. Do this twice; on the third start you should see Automatic Repair, where you select Advanced options.
  • Installation media: on another PC, make a Windows USB with the Media Creation Tool, start the stuck PC from it, select Next and then Repair my PC, as Microsoft describes.

In Windows RE, go to Troubleshoot > Advanced options. The tools in the next fixes are all there. Our guide to WinRE covers more ways to open it.

BitLocker: Microsoft notes that on an encrypted device you need the BitLocker recovery key to use certain tools. Find the key before you start, for example in your Microsoft account on another device.

Fix 5: Run Startup Repair

Microsoft describes Startup Repair as a tool that automatically diagnoses and repairs issues that can prevent Windows from starting. As general guidance, it is a sensible first tool to try, because it is designed to fix startup problems rather than change your files.

  1. In Windows RE, select Troubleshoot > Advanced options > Startup Repair.
  2. Pick your account and enter its password if Windows asks.
  3. Let it finish, then restart and sign in again.

Startup Repair may report that it couldn’t repair the PC. That doesn’t mean other fixes will fail; it can’t detect every cause of a sign-in hang, so continue with the next fix.

Fix 6: Uninstall the latest update

If the hang started right after Windows Update, removing that update is a quick test. Microsoft lists Uninstall Updates among the Windows RE tools, which lets you remove recently installed updates.

  1. In Windows RE, select Troubleshoot > Advanced options > Uninstall Updates.
  2. Choose Uninstall latest quality update for a monthly update, or Uninstall latest feature update after a version upgrade.
  3. Follow the prompts, restart and test the sign-in.

The exact labels may differ slightly between Windows versions. If the problem goes away, Windows Update may offer the same update again later; check for a newer fix before you let it reinstall.

Fix 7: Start in Safe Mode and remove the culprit

Safe Mode, in Microsoft’s words, starts Windows in a basic state, using a limited set of files and drivers. If you can sign in there, the problem is in something that loads only in a normal start: a driver, a service or a startup app.

Microsoft’s Windows startup settings page gives these steps:

  1. Open Windows RE (Fix 4).
  2. Select Troubleshoot > Advanced options > Startup Settings, then Restart.
  3. When the Startup Settings list appears, press 4 or F4 for Enable Safe Mode, or 5 or F5 for Safe Mode with Networking if you need the internet.

Warning: if the drive is encrypted, the startup settings page also says you need the BitLocker key here. Have it ready before you restart.

Once you are signed in to Safe Mode, work through the last changes you made. As general guidance:

  • Startup apps: open Task Manager with Ctrl + Shift + Esc, go to Startup apps and disable everything you don’t need, such as cloud sync tools, launchers and tuning utilities.
  • A new app or driver: uninstall it in Settings > Apps > Installed apps. For a display driver that changed recently, roll it back in Device Manager.
  • Third-party antivirus: a security suite can hook into sign-in. Uninstall it as a test; Microsoft Defender should turn itself back on when it is gone.
  • Fast Startup: as general guidance, turning it off makes shutdown start Windows fresh next time, which may clear a state that keeps coming back. See how to disable Fast Startup.

Restart normally after each change to see whether the Welcome screen clears. Our Safe Mode guide has more ways in and out.

If the PC still starts in Safe Mode after that, Microsoft’s fix is: press Windows + R, type msconfig, select OK, open the Boot tab and clear the Safe boot checkbox under Boot options.

Another option on the same list, Enable boot logging, creates a file named ntbtlog.txt that lists the drivers loaded during startup, according to Microsoft. It can help an experienced user spot a driver that never finishes loading.

Fix 8: Repair system files

Damaged system files can stop the sign-in from completing. From Safe Mode, open Terminal (Admin) or Command Prompt as administrator and run these commands one at a time:

  1. DISM /Online /Cleanup-Image /RestoreHealth
  2. sfc /scannow

As general guidance, DISM repairs the Windows image files that SFC may rely on, which is why it usually runs first. Both can take a while and DISM needs the internet, so pick Safe Mode with Networking for this step. Restart when they finish.

If one account stays stuck while another signs in fine, the user profile itself may be damaged. In that case, create a new local administrator account from Safe Mode, sign in with it and copy your files across from the old profile folder.

Fix 9: Use System Restore

Microsoft says System Restore rolls back system files and settings, but not personal files. It only works if a restore point exists from before the problem.

Warning: apps and drivers installed after the restore point you pick may be removed and need to be installed again. As general guidance, a completed restore can usually be undone from System Restore, so let it finish rather than turning off the PC midway.

  1. In Windows RE, select Troubleshoot > Advanced options > System Restore.
  2. Choose your account and enter its password.
  3. Pick a restore point dated before the Welcome screen problem started, and select Scan for affected programs to see what will change.
  4. Confirm and let the PC restart. Don’t turn it off while the restore runs.

Microsoft also lists a Point-in-time restore option, which rolls back the entire PC, including apps, settings and personal files. It may not appear on every PC. Use that one with care, as anything saved after the restore point can be lost.

Fix 10: Reset this PC as a last resort

Microsoft describes Reset this PC as a way to reset the computer to its factory settings, with a choice about keeping personal files.

Warning: as general guidance, a reset may remove your installed apps and many settings, even with Keep my files. Remove everything also deletes your documents, photos and other personal files. Before you reset, copy important files to an external drive, for example from Safe Mode, and make sure you know your Microsoft account password and, if the drive is encrypted, the BitLocker recovery key.

  1. In Windows RE, select Troubleshoot > Reset this PC.
  2. Choose Keep my files unless you have already backed everything up.
  3. Choose cloud download or local reinstall and follow the prompts.

If the PC still hangs at Welcome after a clean reset, a hardware fault such as a failing drive is worth checking, and the manufacturer’s diagnostics are a good next step.

Official sources

How we write our guides: read our editorial policy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *