Quick answer: Windows 11 may leave Hibernate out of the power menu by default. Open Control Panel and go to System and Security > Power Options > Choose what the power buttons do, select Change settings that are currently unavailable, tick Hibernate under Shutdown settings and select Save changes. If there is no Hibernate checkbox, hibernation is turned off: open Terminal as administrator, run powercfg /hibernate on, then go back to that screen. Run powercfg /availablesleepstates first if you want to know whether your PC can hibernate at all.
In this guide
- Why Hibernate is missing
- Step 1: Check whether your PC supports hibernation
- Step 2: Turn hibernation on with powercfg
- Step 3: Add Hibernate to the power menu
- Step 4: Use Hibernate, or set the lid and power button to it
- Modern Standby PCs with no hibernate
- The hibernation file and disk space
- How Fast Startup fits in
- Work or school PCs
- Related guides
Applies to: Windows 11 laptops and desktops where Start > Power shows only Sleep, Shut down and Restart. Before you start: you need an administrator account for the powercfg steps and for the Control Panel checkbox.
Why Hibernate is missing
Hibernate saves everything in memory to a file on the system drive and then powers the PC down, so you return to the same apps and windows. Microsoft’s Shut down, sleep, or hibernate your PC page says the option was designed for laptops and might not be available for all PCs. There are a few separate reasons it doesn’t appear, and each has its own fix.
| What you see | Possible reason | Go to |
|---|---|---|
| Hibernate checkbox exists in Power Options but isn’t ticked | Hidden from the menu, hibernation itself is on | Step 3 |
| No Hibernate checkbox in Power Options at all | Hibernation is turned off | Steps 1 and 2 |
| powercfg /a says hibernation is not supported | Reduced hibernation file, or no firmware support | Steps 1 and 2 |
| Thin laptop or tablet, sleep wakes almost instantly | Modern Standby device | Modern Standby PCs |
| Company PC, setting grayed out or reverts | Organization policy | Work or school PCs |
Step 1: Check whether your PC supports hibernation
Microsoft’s powercfg command-line options page describes /availablesleepstates (short form /a) as reporting the sleep states available on the system and attempting to explain why others are unavailable. Open Terminal or Command Prompt and run:
powercfg /availablesleepstates
The output has two parts: the states the PC can use, and a list of states that are not available, each with a reason. Microsoft’s System power states page explains how to read the hibernation lines:
- Hibernate is listed as available: the PC has a full hibernation file. Skip to Step 3.
- It says hibernation hasn’t been enabled: there is no hibernation file. Turn it on in Step 2.
- It says hibernation is not supported: the PC may be using a reduced hibernation file, which only serves Fast Startup. Step 2 shows how to switch it to full.
- The reason mentions the firmware or the system: as general guidance, the hardware or its firmware may not offer hibernation. A BIOS or UEFI update from the PC maker may change this on some models, but nothing in Windows can add it.
Step 2: Turn hibernation on with powercfg
As general guidance, changing hibernation needs an elevated prompt; in a normal window powercfg may refuse with an access error. Right-click Start and select Terminal (Admin), or follow our guide to open Command Prompt as administrator. Then run:
powercfg /hibernate on
According to Microsoft’s powercfg page, /hibernate (or /h) enables or disables the hibernate feature and also sets the hibernation file size. The command prints nothing when it works. Run powercfg /a again to confirm that Hibernate now shows as available.
If it still says hibernation is not supported
The System power states page describes two hibernation file types. A full file, by default 40% of physical memory, supports hibernate, hybrid sleep and Fast Startup. A reduced file, by default 20% of memory, supports only Fast Startup, and with it powercfg /a reports that hibernation is not supported. To switch to a full file, run:
powercfg /h /type full
Microsoft notes that a full file isn’t recommended on systems with less than 32GB of storage. If the command fails or you set a custom size before, powercfg /hibernate /size 100 sets the file to 100% of memory; Microsoft’s powercfg page says the size can’t be smaller than 50 percent and that setting a size also enables hibernation. Check powercfg /a once more before moving on.
Step 3: Add Hibernate to the power menu
Turning hibernation on doesn’t put it in the Start menu by itself. Microsoft’s Shut down, sleep, or hibernate page gives these steps:
- Select Search on the taskbar, type control panel and open it.
- Select System and Security.
- Under Power Options, select Choose what the power buttons do.
- Select Change settings that are currently unavailable. This unlocks the checkboxes and needs administrator rights.
- Under Shutdown settings, tick Hibernate.
- Select Save changes.
If the checkboxes stay grayed out after step 4, the account may not be an administrator, or a policy may be locking them (see the work section below). If Hibernate is not in the list at all, go back to Step 2: as general guidance, the checkbox appears only while hibernation is enabled.
Step 4: Use Hibernate, or set the lid and power button to it
Once the checkbox is saved, Microsoft lists two ways to hibernate:
- Select Start, then Power > Hibernate.
- Press Windows + X and select Shut down or sign out > Hibernate.
On the same Choose what the power buttons do screen you can set the power button, the sleep button or closing the lid to hibernate, separately for battery and plugged in. Microsoft suggests hibernation when you won’t use a laptop or tablet for a long time and can’t charge it. It uses less power than sleep but resumes more slowly. If a monitor, printer or scanner misbehaves after you resume, Microsoft advises disconnecting and reconnecting it, or restarting the PC.
Modern Standby PCs with no hibernate
Some thin laptops and tablets use Modern Standby, which Microsoft’s System power states page describes as a low-power idle mode of the working state (S0) in which the system stays partially running and wakes faster than traditional sleep. These systems don’t use the S1 to S3 sleep states. Microsoft’s Shut down, sleep, or hibernate page adds that PCs with InstantGo don’t have the hibernate option; as general guidance, InstantGo is an earlier name tied to the same always-connected standby design.
If powercfg /a lists Standby (S0 Low Power Idle) and shows hibernation as unavailable for a hardware or firmware reason, there is no supported Windows setting that adds Hibernate. As general guidance, you can still save battery over a longer break by shutting down, or by checking our guide on laptop battery draining fast in Windows 11 if standby drains the battery overnight. If the PC won’t enter standby at all, see Windows 11 won’t go to sleep.
The hibernation file and disk space
Microsoft’s System power states page says a hibernate transition writes all of memory to a file on the primary system drive, the hibernation file. As general guidance, this is the hidden system file hiberfil.sys in the root of the C: drive. It appears once hibernation is on and is removed when you run powercfg /hibernate off.
Don’t delete hiberfil.sys by hand; as general guidance, Windows keeps it locked and recreates it while hibernation is enabled. If you need the space back, turn hibernation off with powercfg instead. Note that this also turns off Fast Startup and hybrid sleep, which use the same file.
How Fast Startup fits in
According to the System power states page, Fast Startup is the default shutdown in Windows: it signs you out, then saves the kernel to the hibernation file so the next boot is faster. That is why the Turn on fast startup checkbox sits next to Hibernate under Shutdown settings, and why both vanish when hibernation is off.
- If you followed a guide that ran
powercfg /h offto stop Fast Startup, that is also what removed Hibernate. Our guide on how to disable Fast Startup shows a way to drop Fast Startup with the checkbox while keeping hibernation on. - As general guidance, once the hibernation file is full size the two checkboxes work independently: you may tick Hibernate and untick Fast Startup, or the reverse.
- If shutdown hangs or the PC turns itself back on, see Windows 11 not shutting down.
Work or school PCs
On a managed PC, the power menu may be controlled by your organization. As general guidance, Group Policy has a setting named Show hibernate in the power options menu under Computer Configuration > Administrative Templates > Windows Components > File Explorer, and power policies may also turn hibernation off or lock the Power Options checkboxes. If the Hibernate checkbox is grayed out or reverts after a restart, don’t change policies or registry values on a company device. Ask your IT team whether hibernation is allowed, and tell them the device name and what powercfg /a reports.
Related guides
- How to disable Fast Startup in Windows 11 and 10
- Windows 11 won’t go to sleep: how to fix it
- Windows 11 not shutting down: how to fix it
- How to open Command Prompt as administrator in Windows 11 and 10
- Laptop battery draining fast in Windows 11: how to fix it
Leave a Reply