VLC no sound: how to fix it on Windows 11

Quick answer: if VLC plays video with no sound on Windows 11, first check that VLC itself isn’t muted and that Audio > Audio Device points to the speakers or headphones you are using. Then look at Audio > Audio Track in case the track is disabled. If sound still doesn’t play, reset VLC’s preferences from Tools > Preferences with the Reset Preferences button, which VideoLAN suggests when VLC acts strangely. If no app on the PC makes sound, the problem is in Windows, not VLC.

Applies to: VLC media player 3.x on Windows 11 (desktop version from videolan.org). Menu names below are from the desktop app and can differ slightly between releases.

First: is it only VLC?

Play a YouTube video in your browser or any sound in Windows. This one test decides where to look:

  • If other apps play sound and only VLC is silent, work through Fixes 1 to 7 in this guide.
  • If nothing on the PC plays sound, VLC settings won’t help. Go to Fix 8 or straight to our full guide on no sound in Windows 11.

A second quick test is to open a different file in VLC. If one file is silent and the others play, the file or its audio track is the issue, not your setup.

Match your symptom

This table points you to the right section.

What you seeWhere to lookGo to
No sound from any file in VLC, other apps fineVLC volume, device or settingsFixes 1, 2, 5, 6
One file silent, others fineAudio track or codec in the fileFix 3
Sound goes to the wrong speakersVLC audio device choiceFix 2
Sound stopped after plugging in headphones or a TVOutput device changedFixes 2 and 8
No sound in any appWindows audioFix 8
Sound plays but lags behind the pictureSync settingsOut of sync section

Fix 1: Unmute VLC and check its volume

As general guidance, VLC has its own volume control at the bottom right of the window, separate from the Windows volume. A crossed-out speaker icon there means VLC is muted.

  1. Click the speaker icon next to VLC’s volume slider to unmute it, or press M while VLC is active.
  2. Drag the VLC volume slider up to at least 100%.
  3. Open Audio in the menu bar and make sure the volume and mute options there match what you expect.

VLC may keep the volume level from the last session, so a slider left near zero can make every new file look silent.

Fix 2: Pick the right audio device in VLC

As general guidance, VLC can send sound to a device that differs from the one you are listening to, for example a monitor’s built-in speakers or a headset that is switched off. To check it while a file is playing:

  1. Open Audio > Audio Device.
  2. Select the speakers or headphones you actually use. Choosing the default device lets VLC follow the Windows default.
  3. If the list is empty or the device you want is missing, Windows doesn’t see it. Check the connection first; for wired sets see headphones not detected, and for wireless ones Bluetooth not working in Windows 11.

If you just plugged in a device while VLC was open, stop playback, close VLC and start it again so it picks up the new device.

Fix 3: Check the audio track

As general guidance, video files can hold several audio tracks (languages, commentary, surround and stereo versions), and a track can end up disabled. Open Audio > Audio Track during playback. If Disable is selected, pick one of the listed tracks instead. If the file has more than one track, try each one.

If the file plays silently only in other Windows apps but works in VLC, the cause may be a missing system codec rather than VLC. Our AC-3 (Dolby Digital) guide covers that case. VideoLAN’s FAQ says that if a file doesn’t seem to work, you should check the features page to confirm VLC supports its format, and that there is no fix for a format VLC doesn’t support.

Fix 4: Raise VLC in the Windows volume mixer

Windows keeps a separate volume level for each app. Microsoft’s guide to fixing sound problems in Windows tells you to raise all volume controls, including app controls, and to check the volume mixer for anything muted:

  1. Right-click the speaker icon on the taskbar and open the volume mixer (Microsoft describes it as the settings icon beside the volume slider, under More mixer settings).
  2. Start a file in VLC so it appears in the list of apps.
  3. Unmute VLC if it is muted and raise its slider.

As general guidance, the mixer can also store a different output device per app. If VLC is assigned to a device you aren’t using, set it back to the default.

Fix 5: Change the audio output module

As general guidance, VLC can talk to Windows audio in more than one way, and switching the method is a reasonable test when VLC is silent but other apps work. VideoLAN’s FAQ also suggests trying a different audio output plugin for audio problems such as sync.

  1. Open Tools > Preferences and select the Audio tab.
  2. Make sure Enable audio is ticked. If it is cleared, VLC plays no sound at all.
  3. In the Output module list, try another option than the current one (for example change Automatic to a specific Windows output, or the reverse).
  4. Select Save, close VLC completely and start it again before you test.

If none of the modules helps, set the list back to Automatic and move on to the reset in Fix 6.

Fix 6: Reset VLC preferences

The VideoLAN wiki page on resetting settings says that many VLC problems come from incorrect settings or a broken plugin cache. A reset clears changes you or an add-on made, including audio settings you may not remember changing. The wiki lists three ways on Windows:

  • Inside VLC: open the preferences dialog from the Tools menu and select the Reset Preferences button.
  • From the Start menu, if VLC was installed normally: open the VideoLAN folder and run Reset VLC media player preferences and cache files.
  • By hand: close VLC, open File Explorer, type %APPDATA% in the address bar, press Enter and delete the folder named vlc.

Note: a reset removes all your VLC preferences, such as hotkeys, subtitle settings and interface choices, not only audio settings. The wiki adds that the button inside VLC may not fix every problem, which is when the manual folder deletion is worth trying.

Fix 7: Update or reinstall VLC

As general guidance, an outdated or damaged install may lose audio after a Windows update. In VLC, Help > Check for Updates looks for a newer version. If that fails, uninstall VLC from Settings > Apps > Installed apps, restart the PC and install the current version again. Download VLC only from videolan.org, since copies from bundle or mirror sites may include extra software.

Reinstalling may not clear your preferences, so if the problem survives a reinstall, do the manual reset from Fix 6 as well.

Fix 8: Fix the Windows side

If no app plays sound, or VLC still shows no working device, the checks belong in Windows. Microsoft’s sound troubleshooting page lists these steps, among others:

  1. Choose the output device: select the speaker icon on the taskbar, then the arrow to the right of the volume slider, and pick your speakers or headphones.
  2. Set the default device under Start > Settings > System > Sound by selecting it under Output.
  3. Turn off Audio enhancements for the device in the Sound settings, under its advanced settings.
  4. Run the audio troubleshooter from Settings > System > Troubleshoot > Other troubleshooters, where you select Run next to Audio.
  5. Change the default format on the Advanced tab of the device’s properties in the Sound control panel (Control Panel, Hardware and Sound, Sound).
  6. Restart the Windows Audio and Windows Audio Endpoint Builder services, and install pending Windows updates.
  7. Update, reinstall or roll back the audio driver in Device Manager, under Sound, video and game controllers.

Each of these steps is explained in more detail in our guide to fixing no sound in Windows 11. For driver work, our guide on how to update drivers in Windows 11 covers when to update and when to roll back.

Sound plays but is out of sync

This is a separate problem from no sound at all. VideoLAN’s FAQ suggests trying a different audio output plugin (see Fix 5) and, if the file itself causes it, using the audio desynchronization compensation option. As general guidance, you can shift the audio during playback with the J and K keys, which move the sound earlier or later in small steps; the change applies to the current playback only.

Known issues

If VLC lost sound right after a VLC or Windows update, check the VideoLAN forums and the VLC bug tracker for reports about your version. When a problem is confirmed there, a later release may fix it, so installing the next update (Fix 7) is the step that fits a fault caused by a new version.

Official sources

How we write our guides: read our editorial policy.

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *