Quick answer: in OBS Studio, right-click the Display Capture source, open Properties and set Capture Method to the Windows 10 option instead of Automatic. The OBS knowledge base says this method works even when OBS and the monitor run on different graphics chips, a mismatch it links to a black preview on laptops. It needs OBS 27 or newer and Windows 10 version 1903 or newer, so Windows 11 qualifies. If you earlier forced OBS onto the power-saving GPU as a workaround, update OBS and Windows, then set it back to high performance.
In this guide
- Why Display Capture shows a black screen
- Match your symptom
- Fix 1: Update OBS and Windows
- Fix 2: Switch the capture method to Windows 10
- Fix 3: Put OBS back on the high-performance GPU
- Fix 4: Check the Display setting and duplicate sources
- Fix 5: Run OBS as administrator
- Fix 6: Update the graphics driver
- Fix 7: Capture one window or game instead
- About the yellow border
- Known issues
- Related guides
Applies to: OBS Studio on Windows 11 desktops and laptops, with the Display Capture source. If you only need a quick recording and not a stream, the built-in tools in our guide to recording your screen in Windows may be enough.
Why Display Capture shows a black screen
The OBS laptop troubleshooting page explains the background. Many laptops have two graphics chips: a power-saving one built into the processor and a faster dedicated card. In the past, OBS could only capture a screen drawn by the same chip OBS itself was running on, so users had to pick between good encoding performance and a working Display Capture. When the two didn’t match, the source stayed black.
OBS 27 added a capture method that removes that limit. According to OBS, on an up-to-date system with OBS 27 or later and Windows 10 1903 or later, the two-GPU conflict should no longer apply. That makes the version check and the capture method setting the first two places to look.
Match your symptom
This table maps the fixes in this guide to what you see. It’s a guide to the sections below, not a list published by OBS.
| What you see | Likely area | Go to |
|---|---|---|
| Black preview on a laptop with two GPUs | Capture method or GPU choice | Fixes 1 to 3 |
| Black preview on one monitor of several | Wrong display selected | Fix 4 |
| Second Display Capture of the same screen stays black | Duplicate source | Fix 4 |
| Black after a graphics driver update | Driver | Fix 6 |
| Only a video player or browser tab is black | Protected content or app setting | Fix 7 |
| A yellow frame around the captured screen | Expected with the Windows 10 method | About the yellow border |
Fix 1: Update OBS and Windows
The newer capture method only exists in recent versions, so confirm both before changing settings. The OBS page gives these checks:
- Look at the top-left corner of the OBS window (the title bar) to see your OBS version. You need 27 or later.
- In Windows, open Settings > System > About and read the version under Windows specifications. Windows 11 meets the 1903 requirement, but installing pending updates is still worth doing.
- If OBS is older than version 27, download the current release from obsproject.com and install it over the old one.
As general guidance, Settings > Windows Update with Check for updates installs the latest Windows fixes, and a restart afterward is needed for some of them. Restart OBS too before testing again.
Fix 2: Switch the capture method to Windows 10
OBS sets the Display Capture method to automatic by default. The laptop troubleshooting page says that if Display Capture doesn’t work, you should pick the Windows 10 method by hand:
- In the Sources panel, right-click your Display Capture source and select Properties.
- Open the Capture Method list and choose the Windows 10 (1903 and up) option.
- Select OK and check the preview.
As general guidance, if the Windows 10 method is already selected and the preview is still black, try the other option in the same list (DXGI Desktop Duplication) as a test, then switch back if it doesn’t help. The exact wording of the list can differ slightly between OBS releases.
Fix 3: Put OBS back on the high-performance GPU
An older workaround for the black screen was to force OBS onto the power-saving graphics chip. The OBS page now advises against keeping that setup: leave OBS on the default high-power GPU, and if you changed it to power saving in the past, update OBS and Windows and then set it back to high power. Running OBS on the faster card gives better encoding performance.
As general guidance, Windows 11 keeps the per-app GPU choice under Settings > System > Display > Graphics:
- Find OBS Studio in the list of apps. If it isn’t there, add it with the browse option and point to obs64.exe in the OBS install folder (by default under Program Files).
- Select OBS Studio and open its graphics preference.
- Choose High performance (or let Windows decide, if that is what you had before), save, and restart OBS.
Your GPU maker’s control app can hold its own per-app setting that overrides or conflicts with the Windows one. If you’re unsure which chips your laptop has, our guide on how to check what graphics card you have shows where to look. NVIDIA users who can’t find the old control panel for this setting can read why NVIDIA Control Panel is missing.
Fix 4: Check the Display setting and duplicate sources
The OBS page on display capture sources lists a Display property that picks which monitor to capture, plus a Show Cursor option. On a multi-monitor setup, a source pointed at the wrong screen, or at a monitor that is off, can look like a fault.
- Open the source’s Properties and check the Display list. Pick the monitor you want and confirm with OK.
- If you use the same screen in several scenes, don’t add a new Display Capture each time. OBS states that only one Display Capture source can be added per display; to reuse it, add the existing source to the other scene (in the Add Source dialog, choose Add Existing).
As general guidance, after you unplug a monitor or change the display arrangement in Windows, reopen the source properties and select the display again, since the saved choice may now point to a different screen.
Fix 5: Run OBS as administrator
As general guidance, starting OBS with administrator rights can help with captures that involve elevated apps or games. Right-click the OBS Studio shortcut, select Run as administrator and confirm the prompt. If that fixes the preview, you can set it permanently from the shortcut’s Properties > Compatibility tab with Run this program as an administrator.
Note: only do this with OBS downloaded from the official site, and turn it off again if it makes no difference.
Fix 6: Update the graphics driver
As general guidance, an outdated or damaged graphics driver can break screen capture in any app, not only OBS. Get the current driver from your laptop maker or from NVIDIA, AMD or Intel, and on a laptop with two GPUs update both. If the black screen started right after a driver update, rolling back that driver in Device Manager is the opposite move to try. Our guide on how to update drivers in Windows 11 covers both directions and when to leave a working driver alone.
Fix 7: Capture one window or game instead
As general guidance, if the rest of the desktop shows up but one browser tab or video player stays black, the cause may be the content, not OBS. Streaming services can block capture of protected video, and that limit is outside OBS settings. For a browser that shows black while other apps look fine, turning off hardware acceleration in the browser’s settings and restarting it is a reasonable test.
For a single game or app, a Game Capture or Window Capture source can be a better fit than Display Capture, because it records only that program and doesn’t depend on the whole monitor. If you share the same screen in Discord as well and the sound goes missing there, see Discord screen share no audio.
About the yellow border
After switching to the Windows 10 capture method, you may see a yellow frame around the captured screen. The OBS laptop troubleshooting page explains that this border is a Microsoft security measure, that only you can see it, and that it doesn’t appear in recordings or streams. OBS says it can’t remove the border at present.
Known issues
If Display Capture turned black right after an OBS or Windows update, check the OBS forums and the OBS issue tracker for reports about your version. When a problem is confirmed there, the fix can arrive in a later release, so installing the next update (Fix 1) or using Window Capture in the meantime (Fix 7) are the steps that fit a fault caused by a new version.
Related guides
- How to record video on screen in Windows (free, built-in tools)
- How to check what graphics card you have in Windows 11
- How to update drivers in Windows 11 (and when not to)
- NVIDIA Control Panel not showing? Why it’s gone and what to use
- Discord screen share no audio: how to fix it on Windows 11
Leave a Reply